NordCap Low temperature CSC 051 K for 5 x GN 1/1, 30 to 120 °C, core temperature sensor, 230 V

Product details

The NordCap low temperature cooking CSC 051 K cooks and keeps food in 5 x GN 1/1 at low temperatures controlled warm – with core temperature sensor, program memory and time control.

The CSC 051 K is designed for keeping warm and controlled cooking of food at low temperatures. As a tableware with outer dimensions of 450 x 663 x 591 mm (W x D x H) it is fitable and stackable, so that it can be flexibly integrated into existing kitchen drains. The cooking room absorbs 5 x GN 1/1-75 in the longitudinal infeed, the power is indicated with 18 kg product quantity per cycle. The working temperature range ranges from 30 to 120 °C, with open door the depth is 1085 mm.

The device is operated via an electronic control in the front panel with digital display, main switch and start/stop button. It is either cooked according to time, temperature or core temperature, as standard a 1-point core temperature sensor is included. Programs can be saved and retrieved again, values are adjusted via up/off buttons. A warm hold function keeps the food at temperature after cooking, an acoustic signal reports the end of the cycle and a manual key lock protects against accidental adjustment. Incense function and WLAN interface are optional.

The full door closes with magnetic closure, has an ergonomic grip and a heat and aging resistant seal. The door stop is left and can be changed factory-side without extra charge if this is specified at the order. The interior of CNS 1.4301 has rounded corners and is therefore easy to clean, the exterior cladding is made of CHR 1.4016. An energy-saving insulation made of mineral wool with a thickness of up to 40 mm keeps the heat in the device. The frame is removable for cleaning, and the front is equipped with adjustable vent valves.

The entire cooking room is heated via a static heating system, a safety thermostat is installed.The connection is electrically connected to 230 V (1-phase, 50 Hz) with a connection value of 1.00 kW and a protection of 4.4 A, the protection class IPX4 protects against splash water. The device is mounted on four suction cup feet and weighs 27 kg net, is manufactured in Italy. Optionally available are height-adjustable feet with 110 to 140 mm, a roller frame with four wheels, two with brakes, lateral handles for transporting the device and a WLAN interface.

• 1 x low temperature cooking CSC 051 K
• 1 x 1-point core temperature sensor
• 1 x frame frame, removable, insert distance 75 mm
• 4 x suction cup feet

• Manufacturer item number: 437011051
• Installation type: Tableware, mountable, stackable
• Suitability: for keeping warm and controlled cooking of food at low temperatures
• Recording (optional): 5 x GN 1/1-75
• Box: lengthwise
• Power: 18 kg Product quantity per cycle
• Working temperature: 30 to 120 °C
• External dimensions (W x D x H): 450 x 663 x 591 mm
• Depth with open door: 1085 mm
• Control: electronic (in the front panel), digital display, time, temperature and core temperature sensor control
• Heating: static, for entire cooking room, safety thermostat
• Type of energy: electric
• Connection: 1,00 kW, 230 V, 1-phase, 50 Hz
• Hedging: 4,4 A
• Protection class: IPX4 (splashproof)
• Insulation: energy-saving insulation (mineral wool), up to 40 mm
• External facing: CHR 1.4016
• Internal facing: CNS 1.4301
• Weight: 27 kg net
• Country of origin: Italy

• Cooking by time, temperature or core temperature
• 1-point core temperature probe as standard
• Memory and retrieval function for programs
• Warm hold function and manual key lock
• Full door with magnetic closure, door stop factory without extra charge changeable
• Adjustable venting valves at the front
• Fitable and stackable

Notes on establishment and operation

A minimum spacing of 50 mm shall be observed for the rear wall.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moduline S.R.L., Via dell' Industria 11, 31029 Vittorio Veneto (TV), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.