NordCap Regeneration oven GRE 061 T for 6 x GN 1/1 or EN 600 x 400, transverse slot, 7-inch touch screen, 230 V

Product details

The NordCap regeneration oven GRE 061 T brings refrigerated food back to temperature in 6 x GN 1/1 in a transverse air intake and is controlled via a 7-inch touch display.

The GRE 061 T is an electrically heated regeneration oven as a tabletop device for the regeneration of refrigerated food. It either takes 6 x GN 1/1-64 in the cross-infeed, 12 plates with 200 to 260 mm or 6 plates with 270 to 320 mm diameter, the output is indicated with 15 kg product quantity per cycle. The input temperature is +3 °C, the working temperature ranges from 30 to 210 °C. The external dimensions are 800 x 715 x 854 mm (W x D x H), with open door 1488 mm depth. The device can be stacked with optional accessories and can also be used for wall mounting.

Control is operated by electronic control in the front panel with 7.0 inch LED display, touch screen, multilingual menu navigation, main switch and start/stop button. The Climachef system takes over automatic moisture control, plus warm-up and pre-heating function, programmable cooking phases, a temperature reduction at the end of the regeneration cycle and an acoustic signal at the end of the cycle. A locking system with password and a self-diagnosis system complete the control, a 1-point core temperature sensor belongs to the series accessories.

The full door with snap closure, rotary handle and heat and ageing resistant seal is hit on the left, the fan wheel is switched off when the door is opened. The CNS 1.4301 interior has rounded corners, the exterior panel is made of CHR 1.4016, an energy-saving insulation made of mineral wool keeps the heat in the device. The suspension frame is removable for cleaning, maintenance components are easily accessible, a drainage system is integrated.

The heating system is heated by an air-cooled heating system with auto-reverse fan wheel operation, automatic humidity ventilation, safety valve and safety thermostat. The connection is made to 230 V (1-phase, 50 Hz) with 3.45 kW and a protection of 15.0 A, the protection class IPX4 protects against splash water. A built-in water connection with 1.5 to 5 bar water pressure is required. Optionally available are, among others, an IoT and a WLAN interface, a QR code recipe, multipoint and needle core temperature probes, a double glass door with separate lighting and a stack kit of exhaust pipe and floor stand. When ordered together with the device, the standard frame can be replaced ex factory by a frame frame EN 600 x 400 mm or a frame GN 1/1 with an increased slot spacing. Net weight is 90 kg, manufactured in Italy.

• 1 x regeneration oven GRE 061 T
• 1 x 1-point core temperature sensor
• 1 x frame frame, removable, insert distance 64 mm
• 4 x Footsets

• Manufacturer item number: 437043061
• Mounting method: tableware, stackable (with optional accessories), optionally wall mounting
• Suitability: for regenerating chilled food
• Box: GN 1/1, cross-section
• Recording (optional): 6 x GN 1/1-64, 12 x plate Ø 200 to 260 mm or 6 x plate Ø 270 to 320 mm
• Frame frame (standard): for 6 x GN 1/1-64, slot spacing 64 mm
• Frame frames (optional): for 5 x GN 1/1-80, for 6 x EN 600 x 400 (distance 64 mm), for 5 x EN 600 x 400 (distance 80 mm)
• Power: 15 kg Product quantity per cycle
• Input temperature: +3 °C
• Working temperature: 30 to 210 °C
• External dimensions (W x D x H): 800 x 715 x 854 mm
• Depth at open door: 1488 mm
• Control: electronic (in front panel), LED display 7.0 inch, touch screen, multilingual
• Heating: recirculation air, autoreverse fan wheel operation, safety thermostat
• Type of energy: electric
• Connection: 3.45 kW, 230 V, 1-phase, 50 Hz
• Hedging: 15.0 A
• Water pressure: 1.5 to 5 bar
• Protection class: IPX4 (splashproof)
• Insulation: energy-saving insulation (mineral wool)
• External facing: CHR 1.4016
• Internal facing: CNS 1.4301
• Weight: 90 kg net
• Country of origin: Italy

• Climachef system for automatic humidity control
• Touch screen with 7.0 inch LED display, multilingual
• 1-point core temperature probe as standard
• Programmable cooking phases, holding and preheating function
• Temperature reduction at the end of the regeneration cycle
• Locking system with password and self-diagnosis system
• Transverse infeed, optionally available with mounting frame for EN 600 x 400

Notes on establishment and operation

A minimum distance of 100 mm must be observed on the sides and on the rear wall. A water connection (1.5 to 5 bar) is required on the construction side. Before stacking equipment, the final overall height must be taken into account with regard to barrier-free and safe access for the operator. GN containers are not included.

Energy labelling

Commercial regeneration ovens are currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moduline S.R.L., Via dell' Industria 11, 31029 Vittorio Veneto (TV), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.