NordCap Underbody induction plate induction buffet, for worktops up to 20 mm, container up to 95 °C, 230 V

Product details

The NordCap induction buffet is mounted under the worktop and heats induction-suitable GN and buffet containers directly to up to 95 °C.

The induction buffet is a substructure induction heater for buffet surfaces and is installed under a construction worktop with up to 20 mm thickness. Worktops made of marble, granite, wood, quartz or dekton are suitable. On the surface there are induction-suitable GN and buffet containers with 200 to 300 mm ferromagnetic floor, which are heated directly to up to 95 °C. The work surface itself heats up to 55 °C, which ensures operational safety for staff and guests. The heating element measures 340 x 340 x 167 mm (W x D x H), the cooking zone 302 x 302 mm.

Control is controlled by an external electronic control unit, which is installed. It offers digital display, touch control panel and on/off switch as well as a temperature and power control with 20 adjustable power levels. The switching function allows the zone to be switched between neutral and heated mode. The operating unit has a cut-out dimension of 198 x 68 mm (W x H) and an external dimension of 228 x 98 mm (W x D), the connection cable is included.

The body of the heating element consists of stainless steel CNS 1.4301, the protection class IP23 protects against spray water. Access to the components is maintenance-friendly. The standard accessories include a heat-resistant silicone spacer and a fresh air connection nozzle with Ø 100 mm for ventilation of the unit.

The induction buffet is connected to 230 V (1-phase, 50 Hz) with a connection value of 0.65 kW and a protection of 3.0 A, a connection cable is supplied. On the construction side, sufficient ventilation is provided via the 100 mm connection and ventilation is provided. If several unit units are installed side by side, an intermediate distance of 20 mm shall be planned. For trouble-free operation in buffet or catering use only induction-suitable GN and buffet containers with full-surface ferromagnetic floor should be used. The net weight is 5 kg, manufactured in France.

• 1 x induction plate underbody induction buffet
• 1 x External control unit for installation, incl. cable
• 1 x connection cable
• 1 x spacer, silicone, heat resistant
• 1 x fresh air connection, Ø 100 mm

• Manufacturer item number: 5321587
• Installation type: sub-assembly
• Suitable: for installation under worktops up to 20 mm thickness (marble, granite, wood, quartz or dekton)
• Recording: GN and buffet tanks suitable for induction with 200 to 300 mm ferromagnetic bottom
• Working temperature: up to 95 °C (container), working surface temperature up to 55 °C
• Power levels: 20
• Control: external electronic control (installable), digital display, touch control panel
• Control unit: cut-out dimension (W x H) 198 x 68 mm, outside dimension (W x D) 228 x 98 mm
• External dimensions (W x D x H): 340 x 340 x 167 mm
• Cooking zone: 302 x 302 mm
• Type of energy: electric
• Connection: 0.65 kW, 230 V, 1-phase, 50 Hz, with connection cable
• Hedging: 3,0 A
• Protection class: IP23 (spray water protected)
• External facing: body CNS 1.4301
• Weight: 5 kg net
• Country of origin: France

• Mounting under worktops up to 20 mm thickness
• Suitable for marble, granite, wood, quartz or dekton
• Direct heating of the containers up to 95 °C, working surface up to 55 °C
• Switching the zone between neutral and heated operation
• External installation control unit with touch control panel and 20 power levels
• Low connection value from 0.65 kW to 230 V

Notes on establishment and operation

The unit is mounted under a construction worktop with a maximum thickness of 20 mm. On the construction side a sufficient ventilation (100 mm connection) and ventilation must be ensured, if several unit units are installed an intermediate distance of 20 mm must be planned. For the operating unit a recess of 198 x 68 mm must be provided. Use only induction-suitable GN- and buffet containers with full surface, ferromagnetic bottom.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.