NordCap Flake ice maker SPH 80 W, flake ice cream approx. 70 kg/24 h, 25 kg storage tank, water-cooled

Product details

The NordCap flakes ice maker SPH 80 W produces approximately 70 kg of pourable flakes ice in 24 hours and stores it in the integrated 25 kg storage tank.

The SPH 80 W is a water-cooled flake ice maker for the production of flake ice or break ice. According to the manufacturer, the daily output is about 70 kg. The ice is produced with an ideal temperature of -0.5 °C, is formed crystalline and is always pourable. It collects in the integrated storage container with 25 kg capacity. As a stand-up unit, the ice maker measures 529 x 629 x 880 mm (W x D x H) and can therefore be well planned into kitchen and output areas.

Ice production runs through a fully automatic production control system. At the heart is a special cylindrical evaporator with stainless steel screw cylinder, which continuously produces the ice. All water-bearing parts are made of food-safe materials. The machine is water cooled and works with the natural refrigerant R-290 (propane).

The housing is made of stainless steel 1.4509 with rounded edge protection, the inner container is deep drawn in a pcs made of polyethylene. Dirt-prone components can be removed from the front, which facilitates cleaning and maintenance. Included are two drain hoses, two connection hoses and an ice shovel.

The unit is designed for operation up to 43 °C ambient temperature, the actual production volume depends on ambient and water supply temperature. Two water flows with 5 to 38 °C and 1 to 5 bar as well as two water drains are required. An optional water softening system is available as a starter set with water filter for ice machines. The net weight is 52 kg, the SPH 80 W is produced in Italy.

• 1 x Flake ice maker SPH 80 W
• 2 x drain hose
• 2 x connecting hose
• 1 x ice shovel

• Manufacturer's item number: 41320802902
• Ice form: Flake or break ice, crystalline shaped, always pourable, ideal temperature -0.5 °C
• Production output: approx. 70 kg / 24 h
• Storage tank: 25 kg, integrated
• External dimensions (W x D x H): 529 x 629 x 880 mm
• Installation type: Stand-up equipment
• Type of cooling (machine): water cooling
• Evaporator: special evaporator, cylindrical, stainless steel screw cylinder
• Refrigerants: R-290 (propane), GWP100 (AR5): 3
• Protection: 10,0 A, Delivery without plug
• Water inflow: 5 to 38 °C, water pressure 1 to 5 bar
• Device operation up to 43 °C ambient temperature
• Outside facing: stainless steel 1.4509, rounded edge protection
• Inner container: polyethylene, deep drawn in a pcs
• Weight: 52 kg net
• Country of origin: Italy

• Flake or break ice, crystalline shaped and always pourable
• Integrated storage tank with 25 kg
• Fully automatic production control
• Cylindrical special evaporator with stainless steel screw cylinder
• Water cooling with natural refrigerant R-290
• Detergent components can be extended from the front
• Water guide parts of food-based materials

Notes on establishment and operation

The installation requires a wall spacing of at least 152 mm. On the construction side, 2 x water inflow and 2 x water drain are required. The daily amount of ice produced may vary depending on the water inflow temperature. Please note the cleaning and maintenance instructions of the operating instructions.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial ice makers are currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.