NordCap Ice cube maker SDH 64 W, hollow cubes up to 60 kg/24 h, 20 kg storage container, water-cooled

Product details

The NordCap ice cube maker SDH 64 W produces up to 60 kg of hollow cubes in 24 hours and stores them in the integrated 20 kg container.

The SDH 64 W is a water-cooled ice cube maker, which can also be installed. It is used for the production of hollow cubes, which according to the manufacturer are ideal for chilled juices and soft drinks. The capacity is up to 60 kg ice in 24 hours, a single cube measures approx. 35 x 29 x 36 mm (W x D x H) and weighs about 21 grams. The external dimensions of the device are 485 x 575 x 905 mm (W x D x H).

The cubes are collected in the integrated storage container, which holds 20 kg or about 950 ice cubes. Ice production works with a positive spraying system and a fully automatic production control, the defrosting is done automatically with hot gas and fresh water. A cleaning system is available as standard, and the discharge nozzles are already pre-installed.

The housing is made of stainless steel 1.4509 with rounded edge protection, the inner container is deep drawn in a pcs of polyethylene. All water-bearing parts are made of food-like materials. Dirt-prone components can be removed from the front for cleaning and maintenance. The scope of delivery includes drain hose, connection hose and ice shovel.

The machine is water-cooled and works with the natural refrigerant R-290 (propane) with a filling quantity of 130 g. It is plug-in for 230 V with a connection value of 0.35 kW and a protection of 10 A, the energy consumption is 7.10 kWh in 24 hours. Operation is possible up to 43 °C ambient temperature, the production volume depends on ambient and water inflow temperature. A water inlet with 5 to 38 °C at 1 to 5 bar and 1 + 1 x water flow are required. An optional water softening system is available as a starter set with water filter for ice machines.

• 1 x Ice cube maker SDH 64 W
• 1 x drain hose
• 1 x connection hose
• 1 x ice shovel

• Manufacturer item number: 41330601064
• Ice shape: hollow cube, approx. 35 x 29 x 36 mm (W x D x H), approx. 21 g
• Suitable: ideal for chilled juices and soft drinks
• Production output: up to 60 kg / 24 h
• Storage tank: 20 kg (approx. 950 ice cubes), integrated
• External dimensions (W x D x H): 485 x 575 x 905 mm
• Installation type: Stand-up device, fitable
• Type of cooling (machine): water cooling
• Refrigerant: R-290 (propane), filling quantity 130 g
• Cleaning system: series
• Connection: plug-in, 0,35 kW, 230 V, 1-phase, 50 Hz
• Hedging: 10 A
• Energy consumption: 7,10 kWh / 24 h
• Water inflow: 5 to 38 °C, water pressure 1 to 5 bar
• Device operation up to 43 °C ambient temperature
• Outside facing: stainless steel 1.4509, rounded edge protection
• Inner container: polyethylene, deep drawn in a pcs
• Weight: 48 kg net
• Country of origin: Italy

• Hollow cubes, ideal for chilled juices and soft drinks
• Positive spray system with fully automatic production control
• Automatic defrosting with hot gas and fresh water
• Cleaning system as standard
• Detergent components can be extended from the front
• Pre-installed discharge nozzles
• Fitted

Notes on establishment and operation

The installation requires a wall spacing of at least 152 mm. On the construction side, 1 x water inlet and 1 + 1 x water drain are required. The amount of ice produced daily may vary depending on the water inlet temperature.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial ice makers are currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.