NordCap Cooling table KTZ 4-70-4T IFR with 4 doors for GN 1/1, centrally cooled, installation compartment right

Product details

The NordCap cooling table KTZ 4-70-4T IFR offers four door compartments for GN 1/1 with 393 liters net content and is operated as a centrally cooled device comfortably via the IDEAL AKE control with touch display.

The KTZ 4-70-4T IFR is a centrally-cooled cooling table with four door compartments for GN 1/1 gas standard containers, designed for cooling and storing meat, vegetables and beverages. With external dimensions of 1940 x 660 x 700 mm (W x D x H) with a body height of 700 mm and a net content of 393 litres, it creates cooled storage space directly at the workplace. Each compartment is inside 325 mm wide, 530 mm deep and 570 mm high; with optional special accessories you can optionally accommodate up to 7 GN-Tragroste 1/1. The cooling table is built-in and comes in the basic equipment without worktop, a worktop made of CNS is optionally available.

The four full doors made of CNS with front flush door and shop sheets are self-closing and have hinges for door openings of 60°, 90°, 120° and 180°, a frame heating, a CNS grip strip and a magnetic seal that can be replaced without any tools; The door stop is left, left, right, right, the useful height of the doors is 570 mm. The variation body allows the individual combination of GN 1/1, GN 2/1 and installation elements in the sizes 1⁄2, 1⁄3 and 2⁄3 and can be retrofitted afterwards without much effort. Semi-drawers or full drawers can be combined as optional load elements instead of a door. The cooling table is operated via the IDEAL AKE control with LCD touch screen (2.4 inches), multilingual menu guidance, evaporator fan control, ECO mode and time change for night mode; the defrosting is done automatically. Optionally available is a touch display with 3.5 inch.

The outside of the cooling table is covered with stainless steel CNS 1.4301, the viewing sides are brushed. Inside it also consists of CNS 1.4301 with a insulated, sealed and leakproof bottom tray with rounded edges, the interior has rounded corners. The body is insulated with XPS premium insulation, the fronts with PUR hard foam of up to 50 mm. For cleaning the condenser filter can be removed and cleaned in the machine, the condensate tank is removable and dishwasher-compatible. The evaporator with 4D air guide between the loading sheet and the charging basket is protected in a CNS housing, can be swivelled 45° and has a special duplex coating for highest corrosion protection in the salt spray test according to DIN EN ISO 9227. On request, the material quality 1.4404 V4A as well as powder coatings are available in all RAL colours and various decorative variants.

Cooled by circulating air, the cooling table is centrally cooled and operates with a separate liquefaction set. An expansion valve for R-134a / R-513A is pre-installed, the cooling capacity is 385 W at -10 °C evaporation temperature; further evaporator versions for R452a, EVR, CO2 and brine are optionally available. Cold and dew water pipes are protected in the rear wall, the energy-saving 24 volt fans are located in the removable CNS fan housing and can be controlled at the speed. The installation compartment is on the right and is 180 mm wide, cabling and components are easily accessible. The temperature range is -2 to 8 °C, given at 40 °C ambient temperature and 40 % relative humidity. Tested according to climate class 4, under conditions of climate class 5 (+40 °C) and the device keeps this range under normal use, whereby the energy consumption can vary. On the construction side, a dew water drain is required, alternatively an electric dew water evaporation tray is optionally available.

• 1 x cooling table KTZ 4-70-4T IFR (basic equipment without worktop)
• 1 x GN-tragrost 1/1, CNS, per door compartment
• 3 x support rails (2 pcs) for GN 1/1 inserts, height adjustable, per compartment

• Manufacturer item number: 48531000658
• Model: KTZ 4-70-4T IFR
• compartments: 4 (4 x full door, CNS)
• Suitable: for GN 1/1, for cooling and storage of meat, vegetables and beverages
• Construction option: fitable, basic equipment without worktop
• External dimensions (W x D x H): 1940 x 660 x 700 mm
• Body height: 700 mm
• Internal dimensions per compartment (W x D x H): 325 x 530 x 570 mm
• Working height of the doors: 570 mm
• Depth with open door: 1070 mm
• Net content: 393 l
• Recording (optional): up to 7 x GN-Tragrost 1/1 (with optional special accessories)
• Door stop: left left left right right
• Door opening: self-closing, door opening 60°, 90°, 120°, 180°
• Installation compartment: right, width 180 mm
• Temperature range: -2 to 8 °C (at 40 °C ambient temperature and 40 % relative humidity)
• Climate class: 4 (+30 °C ambient temperature, 55% relative humidity)
• Connection type: Centrally cooled (operation with separate liquefaction set)
• Type of cooling: recooling, evaporator with 4D air guide, 45° swivelling, duplex coating
• Refrigerant: expansion valve R-134a / R-513A pre-installed
• Cooling capacity: 385 W at -10 °C Evaporation temperature
• Control: IDEAL AKE control, touch display (2.4 inch), multi-lingual, evaporator control, ECO mode, night mode
• Defrosting: automatic
• Fan: 24 volts, fan speed adjustable
• exterior facing: CNS 1.4301, face brushed
• Internal cladding: CNS 1.4301, detachable, densely welded bottom tray with rounded edges, leakproof
• Insulation: body XPS premium insulation, fronts PUR hard foam up to 50 mm
• Country of origin: Austria

• IDEAL AKE control with touch display (2.4 inch), ECO mode and night mode
• Variation body for GN 1/1, GN 2/1 and mounting elements in 1⁄2, 1⁄3 and 2⁄3, retrofittable
• Self-locking CNS full doors with door opening position 60°, 90°, 120° and 180° and tool-free interchangeable magnetic seal
• Evaporator with 4D air guide and duplex coating, corrosion protection according to DIN EN ISO 9227
• Energy-saving 24 volt fan in removable CNS fan housing, speed adjustable
• Capacitor filter machine suitable, condensate pan dishwasher suitable
• Installation compartment right with easy to reach cabling and components

Notes on establishment and operation

The cooling table is centrally cooled and is operated with a separate liquefaction kit, an expansion valve for R-134a / R-513A is pre-installed. On the construction side a dew water drain is required, alternatively an electric dew water evaporation tray is optionally available. The basic equipment is supplied without worktop.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial refrigerated storage cabinets operated with a separate liquefaction set shall not be subject to any EU energy label marking requirement under (EU) 2015/1094 (no EPREL registration).

Product safety (GPSR)

Manufacturer: IDEAL Kältetechnik GmbH, In der Schörihub 28, 4810 Gmunden, Austria
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.