NordCap Cooling table UBZ 2-46-2T IFL with 2 doors for GN 1/1, centrally cooled, -2 to 8 °C, installation compartment left

Product details

The NordCap cooling table UBZ 2-46-2T IFL offers a net capacity of 114 litres in two door compartments for GN 1/1 and is designed as a centrally cooled unit with an installation compartment on the left for operation with a separate liquefaction set.

The UBZ 2-46-2T IFL is a two-part cooling table for GN 1/1 gas standard containers and is used for cooling and storing meat and vegetables. It is fitted with external dimensions of 1060 x 660 x 460 mm (W x D x H) with a body height of 460 mm and is supplied in the basic equipment without worktop. The inner dimensions of the compartments are 530 mm in depth and 330 mm in height at a width of 325 / 325 mm. The net content is 114 litres, optionally up to 5 GN-tragroste 1/1 can be accommodated, whereby special accessories are required. Cooled by circulating air in the temperature range from -2 to 8 °C, expressed at 40 °C ambient temperature and 40 % relative humidity.

The two full doors made of CNS are self-closing and flush-front design, a frame heating is integrated. The hinge allows door openings at 60°, 90°, 120° and 180°, the door stop is left / right, the useful height of the doors is 330 mm. CNS grippers and tool-free interchangeable magnetic seals are part of the equipment. The cooling table is operated via the IDEAL AKE control system with a 2.4-inch LCD touch screen, multilingual menu guidance, evaporator control, ECO mode and time change for night mode.

As a variation body, the cooling table can be individually combined with GN 1/1, GN 2/1 and installation elements in the sizes 1⁄2, 1⁄3 and 2⁄3, even later and without much effort. The exterior paneling is made of CNS 1.4301 with brushed face-up sides, inside CNS 1.4301 is used with detachable, sealed and leakproof bottom tray with rounded edges. The body is insulated with XPS premium insulation, the fronts with PUR hard foam up to 50 mm. Condenser filters and condensate trays are removable for cleaning, the condensate tray is dishwasher-compatible.

A expansion valve for R-134a / R-513A is pre-installed, the cooling capacity is 170 W at -10 °C evaporation temperature. The evaporator with 4D air guide between the loading sheet and the charging basket is protected in a CNS housing, can be swivelled by 45° and has a special duplex coating with the highest corrosion protection in the salt spray test according to DIN EN ISO 9227. Energy-saving 24-volt fans with adjustable speed are protected in the removable CNS fan housing, cold and dew water pipes are protected in the back wall. The installation compartment on the left with 180 mm width makes cabling and components easily accessible. Optionally available are a CNS worktop, a GN 1/1 intermediate grating, load elements with full-out instead of a door, a control with 3.5-inch touch display and an electric dew water evaporation shell.

• 1 x cooling table UBZ 2-46-2T IFL (basic equipment without countertop)
• 1 x GN-tragrost 1/1, CNS, per door compartment
• 2 x support rails (each 2 pcs) for GN 1/1 inserts, height adjustable, per compartment

• Manufacturer item number: 48531000623
• Parts: 2 (each 1 x full door, CNS)
• Suitable: for GN 1/1, for cooling and storage of meat and vegetables
• Construction option: fitable, basic equipment without worktop
• Connection type: Centrally cooled (operation with separate liquefaction set)
• External dimensions (W x D x H): 1060 x 660 x 460 mm
• Body height: 460 mm
• Internal dimensions (W x D x H): 325 / 325 x 530 x 330 mm
• Depth with open door: 1070 mm
• Operating height of the doors: 330 mm
• Door stop: left / right
• Net content: 114 l
• Recording (optional): up to 5 x GN-Tragrost 1/1 (with special accessories)
• Temperature range: -2 to 8 °C (at 40 °C ambient temperature and 40 % relative humidity)
• Climate class: 4 (+30 °C ambient temperature, 55% relative humidity)
• Type of cooling: recirculated air cooling
• Refrigerant: expansion valve R-134a / R-513A pre-installed
• Cooling capacity: 170 W at -10 °C Evaporation temperature
• Control: IDEAL AKE control, touch display (2.4 inch), multi-lingual, evaporator control, ECO mode, night mode
• Defrosting: automatic, constructional dewwater drainage required
• Installation compartment: left, width 180 mm
• exterior facing: CNS 1.4301, face brushed
• Internal cladding: CNS 1.4301, detachable, densely welded bottom tray with rounded edges, leakproof
• Insulation: body XPS premium insulation, fronts PUR hard foam up to 50 mm
• Country of origin: Austria

• IDEAL AKE control with 2.4-inch LCD touchscreen, ECO mode and night mode
• Variation body for GN 1/1, GN 2/1 and mounting elements (1⁄2, 1⁄3, 2⁄3), retrofittable afterwards
• Self-closing, flush-front CNS full doors with frame heating and opening at 60°, 90°, 120° and 180°
• Tool-free interchangeable magnetic seals
• Evaporator with 4D air guide, 45° swivelling, duplex coating with corrosion protection according to DIN EN ISO 9227
• Energy-saving 24-volt fan, speed adjustable
• Detachable condensate tank and dishwasher-compatible
• Installation compartment left (180 mm) with easy to reach cabling

Notes on establishment and operation

The cooling table is centrally cooled and is operated with a separate liquefaction set, an expansion valve for R-134a / R-513A is pre-installed. A construction-side dew water drain is required, alternatively an electric dew water evaporation shell is optionally available. The climate classification was determined as part of the laboratory tests for the Energy Efficiency Regulation (EU) 2015/1094 with climate class 4, reached under climate class 5 (+40 °C ambient temperature) and keeps the device -2 to 8 °C under normal use, the energy consumption values may differ.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial refrigerated storage cabinets operated with a separate liquefaction set shall not be subject to any EU energy label marking requirement under (EU) 2015/1094 (no EPREL registration).

Product safety (GPSR)

Manufacturer: IDEAL Kältetechnik GmbH, In der Schörihub 28, 4810 Gmunden, Austria
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.