NordCap Regeneration oven RRT 162 E, mobile, 2 full doors, for 16 x GN 2/1, 30 to 210 °C, touch display

Product details

The mobile NordCap regeneration oven RRT 162 E regenerates chilled food in 16 x GN 2/1 behind two full doors and can be pushed on rolls to where it is served.

The RRT 162 E is a mobile regeneration oven for the regeneration of refrigerated food with a temperature of +3 °C. The cooking room can be used for 16 x GN 2/1-79 in a cross-infeed, 64 plates with 200 to 260 mm or 32 plates with 270 to 320 mm diameter. The output is given with 115 kg product quantity per cycle, the working temperature range ranges from 30 to 210 °C. The outside dimensions are 940 x 975 x 1900 mm (W x D x H), with open door 1705 mm depth.

Control is operated by electronic control in the front panel with 4.3-inch LED display, multilingual touch screen, main switch and start/stop button. Time, temperature and humidity can be regulated, a start delay is possible. At the end of the regeneration cycle, the temperature is reduced, the warming function keeps the food ready, and an acoustic signal reports the end of the cycle.

For mobile use, four rolls with a diameter of 150 mm, two with brakes, ergonomic handles for pushing and a surrounding rubber floor strip ensure. The two full doors with snap closure, one rotary handle and heat and aging resistant seal are struck on the left, the stop can be changed on the factory side at an additional cost. The interior of CNS 1.4301 has rounded corners, the outside is covered with CHR 1.4016. The frame is removable for cleaning, maintenance components are easily accessible.

The heat is heated by a recirculation air heating system with autoreverse fan wheel operation and safety thermostat, an energy-saving insulation with up to 35 mm keeps the heat in the device. The moisture is fed from a retractable water tank, the waste water collects in a collection tray below. It is connected to 400 V (3N, 50 Hz) with 10.15 kW and a protection of 14.7 A, the protection class is IPX4. Optionally available are the Climachef system for automatic humidity control, 1-point, multipoint and needle core temperature sensors, a USB interface for reading HACCP data, an adjustable fan speed, a glass door with separate lighting and factory door stop change.

• 1 x regeneration furnace RRT 162 E
• 1 x mounting frame, removable, insert distance 79 mm
• 4 x castors, Ø 150 mm, of which 2 with brakes

• Manufacturer item number: 437055162
• Installation type: Stand-up device (mobile)
• Suitability: for regenerating chilled food
• Box: GN 2/1, crosswise
• Recording (optional): 16 x GN 2/1-79, 64 x plate Ø 200 to 260 mm or 32 x plate Ø 270 to 320 mm
• Frame frame (standard): for 16 x GN 2/1-79, insert distance 79 mm
• Power: 115 kg Product quantity per cycle
• Input temperature: +3 °C
• Working temperature: 30 to 210 °C
• External dimensions (W x D x H): 940 x 975 x 1900 mm
• Depth with open door: 1705 mm
• Control: electronic (in front panel), LED display 4.3 inch, touch screen, multilingual
• Control: time, temperature, humidity; start delay, warm holding function
• Heating: recirculation air, autoreverse fan wheel operation, safety thermostat
• Doors: 2 x full door, snap closure, rotary handle per door, door stop left, changeable at extra cost
• Water supply: retractable water tank, waste water in collection tray (below)
• Type of energy: electric
• Connection: 10.15 kW, 400 V, 3N, 50 Hz
• Hedging: 14,7 A
• Protection class: IPX4 (splashproof)
• Insulation: energy-saving insulation, up to 35 mm
• External facing: CHR 1.4016
• Internal facing: CNS 1.4301
• Weight: 170 kg net
• Country of origin: Italy

• Can be driven on 4 wheels, 2 of which with brakes, with ergonomic sliding handles
• Two full doors, rubber floor strip around
• Lowerable water tank, no fixed water connection necessary
• LED touch screen 4.3 inch, multilingual, with start delay
• Temperature reduction at the end of the cycle and holding function
• 115 kg product quantity per cycle
• Up to 210 °C working temperature

Notes on establishment and operation

GN containers are not included in the scope of delivery. The connection to 400 V three-phase current must be made by an electrical specialist. The waste water is collected in a collection tray at the bottom of the device.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moduline S.R.L., Via dell' Industria 11, 31029 Vittorio Veneto (TV), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.