NordCap Regeneration furnace RRT 112 E, mobile, for 10 x GN 2/1 or 20 x GN 1/1, 30 to 210 °C, touch display

Product details

The mobile NordCap regeneration oven RRT 112 E regenerates cooled food in 10 x GN 2/1 or 20 x GN 1/1 and can be pushed directly to where it is served on rolls.

The RRT 112 E is a mobile regeneration oven for the regeneration of refrigerated food with a temperature of +3 °C. The cooking room takes up either 10 x GN 2/1-76 or 20 x GN 1/1-76 in the longitudinal or transverse feed, alternatively 40 plates with 200 to 260 mm or 20 plates with 270 to 320 mm diameter. The output is given with 72 kg product quantity per cycle, the working temperature range ranges from 30 to 210 °C. The outside dimensions are 1000 x 855 x 1130 mm (W x D x H), with open door 1515 mm depth.

Control is operated by electronic control in the front panel with 4.3-inch LED display, multilingual touch screen, main switch and start/stop button. Time, temperature and humidity can be regulated, a start delay is possible. At the end of the regeneration cycle, the temperature is reduced, the warming function keeps the food ready, and an acoustic signal reports the end of the cycle.

For mobile use, four 125 mm diameter rollers, two of them with brakes, ergonomic handles for pushing and a rubber floor strip around. The full door with snap closure, rotary handle and heat and aging resistant seal is left-hand and cannot be replaced. The interior of CNS 1.4301 has rounded corners, the outside is covered with CHR 1.4016. The frame is removable for cleaning, maintenance components are easily accessible.

The heat is heated by a recirculation air heating system with autoreverse fan wheel operation and safety thermostat, an energy-saving insulation with up to 35 mm keeps the heat in the device. The moisture is fed from a retractable water tank, the waste water collects in a collection tray below. It is connected to 400 V (3N, 50 Hz) with 6.8 kW and a protection of 9.9 A, the protection class is IPX4. Optionally available are the Climachef system for automatic humidity control, 1-point, multipoint and needle core temperature sensors, a USB interface for reading HACCP data, an adjustable fan speed and a glass door with separate lighting.

• 1 x regeneration furnace RRT 112 E
• 1 x mounting frame, removable, insert distance 76 mm
• 4 x castors, Ø 125 mm, of which 2 with brakes

• Manufacturer item number: 437055112
• Installation type: Stand-up device (mobile)
• Suitability: for regenerating chilled food
• Insert: GN 2/1 or GN 1/1, longitudinally / transversely
• Recording (optional): 10 x GN 2/1-76, 20 x GN 1/1-76, 40 x plate Ø 200 to 260 mm or 20 x plate Ø 270 to 320 mm
• Frame frame (standard): for 10 x GN 2/1-76, insert distance 76 mm
• Power: 72 kg Product quantity per cycle
• Input temperature: +3 °C
• Working temperature: 30 to 210 °C
• External dimensions (W x D x H): 1000 x 855 x 1130 mm
• Depth at open door: 1515 mm
• Control: electronic (in front panel), LED display 4.3 inch, touch screen, multilingual
• Control: time, temperature, humidity; start delay, warm holding function
• Heating: recirculation air, autoreverse fan wheel operation, safety thermostat
• Door: 1 x full door, snap closure, turn handle, door stop left, not changeable
• Water supply: retractable water tank, waste water in collection tray (below)
• Type of energy: electric
• Connection: 6,8 kW, 400 V, 3N, 50 Hz
• Hedging: 9,9 A
• Protection class: IPX4 (splashproof)
• Insulation: energy-saving insulation, up to 35 mm
• External facing: CHR 1.4016
• Internal facing: CNS 1.4301
• Weight: 113 kg net
• Country of origin: Italy

• Can be driven on 4 wheels, 2 of which with brakes, with ergonomic sliding handles
• Circulating rubber floor strip
• Lowerable water tank, no fixed water connection necessary
• LED touch screen 4.3 inch, multilingual, with start delay
• Temperature reduction at the end of the cycle and holding function
• For GN 2/1 and GN 1/1 and plates
• Up to 210 °C working temperature

Notes on establishment and operation

GN containers are not included in the scope of delivery. The connection to 400 V three-phase current must be made by an electrical specialist. The waste water is collected in a collection tray at the bottom of the device.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moduline S.R.L., Via dell' Industria 11, 31029 Vittorio Veneto (TV), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.