NordCap wall-mounted refrigerated display MISTRAL 950 3750 M2, 3 to 5 °C, 3750 mm wide, open front with night blind, centrally cooled

Product details

The NordCap wall-mounted refrigerated display MISTRAL 950 3750 M2 presents packaged sausages and dairy products at 3 to 5 °C in an open design – centrally cooled, with integrated night scooter and can be installed and channelled as a modular system.

The MISTRAL 950 3750 M2 is a wall-mounted refrigerated display for the cooling and presentation of packaged sausages and dairy products. It corresponds to the temperature classification M2, which is intended for dairy products or sausages. With external dimensions of 3750 x 950 x 2090 mm (W x D x H) it offers a gross content of 3028 litres and a product presentation area (TDA) of 6.45 m2. The temperature range from 3 to 5 °C is at 25 °C ambient temperature and 60 % relative humidity, which corresponds to the climate class 3. As a modular system, the shelf can be channelled and mounted, the depth is 950 mm, the front height 320 mm.

The front is open-plan and equipped with an integrated night scooter, which is operated manually. The product is located on five height and tilt adjustable shelves with a depth of 500 mm, supplemented by five shelf-floor scanner rails, as well as on a floor support with a depth of 670 mm. 3 LED interior lights with 4000 K (neutral white) in the ceiling section are switchable separately.

Outside, the shelf is covered with sheet steel and plastic and is equipped with an epoxy powder coating in RAL 9005 (deep black). The shelf is also epoxy coated in RAL 9005 (deep black). The basic equipment includes the shelf without side parts and without control. Optionally available are, among others, a Dixell controller XR50CX Syncro, EC fan, a sewering kit, LED floor lighting for 5 floors in 4000 K (neutral white) or pink, side parts closed, mirrored inside or with panoramic disk, a bumper and merchandise stopper made of acrylic glass.

The MISTRAL 950 3750 M2 is centrally cooled, an expansion valve for the refrigerant R-449A is pre-installed, the filling volume is 450 g. Cooled by circulating air with AC fans, the cooling capacity is 3320 W at -8 °C evaporation temperature. The defrosting is automatically carried out by a compressor stop, for the dew water a construction-side water flow with 40 mm diameter is required. The cooling lines on the evaporator have a diameter of 10/22 mm. Electrically the shelf is connected to 230 V (1-phase, 50 Hz), the connection value is 0.21 kW with a protection of 1.46 A. The shelf is made in Italy.

• 1 x wall-mounted refrigerated display MISTRAL 950 3750 M2 (without side parts, without control)
• 5 x shelf, height and tilt adjustable, depth 500 mm
• 5 x shelf-scanner rail
• 1 x floor support, depth 670 mm

• Manufacturer item number: 4547079512375
• Suitability: for cooling and presentation of packaged sausages and dairy products
• External dimensions (W x D x H): 3750 x 950 x 2090 mm
• depth: 950 mm, front height: 320 mm
• Gross content: 3028 l
• Product presentation area (TDA): 6,45 m2
• Front: open, integrated night blind, manually
• Storage and storage area: 5 x shelf, height/adjustable, depth 500 mm, 5 x shelf scanner rail, 1 x floor support, depth 670 mm
• Lighting: 3 x LED interior lighting (in the ceiling part), 4000 K (neutral white), separately switchable
• Installation type: modular system, can be channelled, built-in, basic equipment without side parts
• Temperature range: 3 to 5 °C at 25 °C ambient temperature and 60 % relative humidity
• Temperature classification: M2 (e.g. dairy products or sausage products)
• Climate class: 3 (+25 °C ambient temperature, 60% relative humidity)
• Connection type: Centrally cooled
• Type of cooling: recirculation air cooling, AC fan
• Refrigerant: expansion valve for R-449A pre-installed, filling volume 450 g
• Refrigeration capacity: 3320 W at -8 °C Evaporation temperature
• Evaporator, cooling lines: Ø 10/22 mm
• Control: Basic equipment without control (optionally available)
• Defrosting: automatic (compressor top)
• Water flow: construction side, Ø 40 mm
• Connection: 0.21 kW, 230 V, 1-phase, 50 Hz
• Hedging: 1,46 A
• exterior facing: sheet steel / plastic, epoxy powder coating, RAL 9005 (low black)
• Internal cladding: outlay surface and inner tub, epoxy coating, RAL 9005 (low black)
• Country of origin: Italy

• For packaged sausages and dairy products at 3 to 5 °C (temperature classification M2)
• Open front with integrated, manual night blind
• 5 shelves with shelf-scanner rail
• Shelving shelves height and tilt adjustable
• LED interior lighting 4000 K in the ceiling part, separately switchable
• Centrally cooled, expansion valve for R-449A pre-installed
• Module system, can be channelled and mounted
• Case in RAL 9005 (low black)

Notes on establishment and operation

The shelf is centrally cooled and is operated with cooled air from an external cooling system, a construction-side water flow with 40 mm diameter is required. For ventilation and ventilation a minimum distance of 60 mm to the rear wall or other rear wall cooling shelves must be planned. The delivery takes place in stable woodwork, without side parts and without control.

Operating instructions

Download user manual (PDF)

Energy labelling

According to the manufacturer, there is no EPREL marking requirement for this centrally-cooled wall-mounted freezer display, as it does not have a built-in cooling system as a cooling unit with direct sales function and is operated with cooled air from an external cooling system.

Product safety (GPSR)

Manufacturer: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.