NordCap HHFT 20 E for horde wagons 20 x GN 1/1 or plate horde wagon, Climachef, 400 V

Product details

The NordCap HHFT 20 E warm-up storage cabinet picks up a horde car for 20 x GN 1/1 or a plate horde car for 62 plates and holds food with climachef moisture control to temperature.

The HHFT 20 E is a stand-up unit for mounting horde frames and plate mounts with longitudinal insert for GN 1/1. Optionally, a horde car for 20 x GN 1/1 or a plate mount car for 62 plates is inserted directly into the cooking room, the power is indicated with 72 kg product quantity per cycle. It is worked between 30 and 120 °C. The outer dimensions are 969 x 1188 x 1967 mm (W x D x H), the inner dimensions 570 x 860 x 1860 mm.

The electronic control in the front panel features a multi-lingual 4.3-inch LED display with touch screen, main switch and start/stop button. Time, temperature and humidity are adjustable, the climachech system takes over automatic humidity control. A start delay is possible, an acoustic signal sounds at the end of the cycle. As standard, a 1-point core temperature sensor and a USB interface are included for reading HACCP data.

The full door closes with a 3-point closure and heat and aging resistant seal, it is opened by a rotary handle, the door stop is right and not changeable. In the cooking room is attached a stainless steel shock guard. The interior of CNS 1.4301 has rounded corners and a flat stainless steel floor, the outside is covered with CHR 1.4016. The energy-saving insulation is up to 35 mm thick, maintenance components are easily accessible.

The heating is carried out by means of a circulating air heating system with autoreverse fan wheel operation and safety thermostat, an automatic moisture venting is available. A water connection with 1.5 to 5 bar water pressure is required for the moisture. Connected to 400 V (3N, 50 Hz) with 6.30 kW and a protection of 9.2 A, the protection class IPX4 protects against splash water. Optionally available are a horde cart for 20 x GN-blech 1/1-65, a plate cart for 62 plates with 230 to 310 mm diameter, a thermal ceiling for the horde cart, a multipoint or needle core temperature sensor and an adjustable fan speed.

• 1 x HHFT 20 E retractor safe
• 1 x 1-point core temperature sensor
• 1 x USB interface for reading HACCP data

• Manufacturer item number: 437034020
• Installation type: Stand-up equipment
• Suitability: for mounting horde frames and plate horde wagons
• Box: GN 1/1, longitudinally
• Recording (optional): 1 x horde car for 20 x GN 1/1 or 1 x plate horde car for 62 x plates
• Power: 72 kg Product quantity per cycle
• Working temperature: 30 to 120 °C
• External dimensions (W x D x H): 969 x 1188 x 1967 mm
• Internal dimensions (W x D x H): 570 x 860 x 1860 mm
• Depth with open door: 1639 mm
• Control: electronic (in front panel), LED display 4.3 inch, touch screen, multilingual
• Control: time, temperature, humidity; climachef system for automatic humidity control; start delay
• Heating: recirculation air, autoreverse fan wheel operation, safety thermostat
• Door: 1 x full door, 3-point lock, turn handle, right door stop, non-changeable
• Connection: 6.30 kW, 400 V, 3N, 50 Hz
• Hedging: 9,2 A
• Water connection: construction side, water pressure 1.5 to 5 bar
• Protection class: IPX4 (splashproof)
• Insulation: energy-saving insulation, up to 35 mm
• External facing: CHR 1.4016
• Internal facing: CNS 1.4301
• Weight: 204 kg net
• Country of origin: Italy

• Introductory model for hordes and plate hordes
• Climachef system for automatic humidity control
• 1-point core temperature sensor and USB interface for HACCP data as standard
• LED touch screen 4.3 inch, multilingual, with start delay
• Flat stainless steel floor and stainless steel floor protection in the cooking room
• Full door with 3-point closure
• 72 kg product quantity per cycle

Notes on establishment and operation

Horde and plate horde trolleys are not included. For operation a water connection (1.5 to 5 bar) is required. The connection to 400 V three-phase current must be made by an electric specialist.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moduline S.R.L., Via dell' Industria 11, 31029 Vittorio Veneto (TV), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.