NordCap Regeneration oven GRE 061 C for 6 x GN 1/1 or EN 600 x 400, rotary knob operation, 30 to 160 °C

Product details

The NordCap regeneration oven GRE 061 C regenerates refrigerated food on six trays for GN 1/1 in the transverse feed – with electromechanical rotary knob control and humidity control.

The GRE 061 C is an electrically heated regeneration oven for the regeneration of refrigerated food. As standard, the mounting frame accommodates 6 x GN 1/1-64 in the cross-inlet, alternatively 12 plates with 200 to 260 mm or 6 plates with 270 to 320 mm diameter can be used. The output is 15 kg per cycle, the input temperature +3 °C, the working temperature range 30 to 160 °C. The external dimensions are 800 x 715 x 822 mm (W x D x H). The unit can be stacked via an optional stack kit and can also be used for wall mounting.

The electromechanical control in the front panel is operated by a rotary knob and has a main switch. Time, temperature and humidity can be controlled directly, at the end of the cycle the device reports with an acoustic signal. A vent valve in the top panel removes moisture from the cooking chamber. When ordering together with the device, the standard frame can be replaced ex-works without extra charge by a frame EN 600 x 400 mm or a GN-1-1 frame with an increased slot spacing.

The full door with snap closure, rotary handle and heat and aging resistant seal is left-hand and can be changed at extra cost, when opening the fan wheel is switched off. The interior of CNS 1.4301 has rounded corners, outside the oven is covered with CHR 1.4016, energy-saving insulation with up to 35 mm keeps the heat in the unit. The frame is removable for cleaning, maintenance components are easily accessible and a drainage system is integrated.

The heat is heated by a recirculating air heating system with autoreverse fan wheel operation and safety thermostat. Connected to 230 V (1-phase, 50 Hz) with 3.45 kW and a protection of 15.0 A, a built-in water connection with 1.5 to 5 bar is required. The protection class IPX4 protects against splash water. Optionally available are a double glass door with separate lighting, frame frames for 5 x GN 1/1 or 5 x EN 600 x 400 with 80 mm as well as for 6 x EN 600 x 400 with 64 mm slot spacing, a stacking kit of exhaust pipe and floor stand and a water tank under construction. The net weight is 94 kg, manufactured in Italy.

• 1 x regeneration oven GRE 061 C
• 1 x frame frame, removable, insert distance 64 mm
• 4 x Footsets

• Manufacturer item number: 437042061
• Mounting method: Tableware, stackable (with optional stacking kit), optionally also suitable for wall mounting
• Suitability: for regenerating chilled food
• Mount (optional): 6 x GN 1/1-64 (reels across), 12 x plate Ø 200 to 260 mm or 6 x plate Ø 270 to 320 mm
• Mounting frame (standard): for 6 x GN 1/1-64
• Frame frames (optional): for 5 x GN 1/1-80, for 6 x EN 600 x 400 (distance 64 mm), for 5 x EN 600 x 400 (distance 80 mm)
• Power: 15 kg Product quantity per cycle
• Input temperature: +3 °C
• Working temperature: 30 to 160 °C
• External dimensions (W x D x H): 800 x 715 x 822 mm
• Depth at open door: 1488 mm
• Control: electromechanical (in the front panel), rotary button operation
• Control: time, temperature, humidity
• Heating: recirculation air, autoreverse fan wheel operation, safety thermostat
• Door: 1 x full door, snap closure, rotary handle, door stop left
• Type of energy: electric
• Connection: 3.45 kW, 230 V, 1-phase, 50 Hz
• Hedging: 15.0 A
• Water connection: construction side, water pressure 1.5 to 5 bar
• Protection class: IPX4 (splashproof)
• Insulation: energy-saving insulation, up to 35 mm
• External facing: CHR 1.4016
• Internal facing: CNS 1.4301
• Weight: 94 kg net
• Country of origin: Italy

• Simple electromechanical rotary knob operation
• Time, temperature and humidity control
• Optionally GN 1/1, EN 600 x 400 or plates
• Stackable and optionally also suitable for wall mounting
• Autoreverse fan wheel operation, shut down at door opening
• Interior with rounded corners, frame removable

Notes on establishment and operation

A minimum distance of 100 mm must be observed on the sides and on the rear wall. A water connection (1.5 to 5 bar) is required on the construction side. Before stacking equipment, the final overall height must be taken into account with regard to barrier-free and safe access for the operator. GN containers are not included.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moduline S.R.L., Via dell' Industria 11, 31029 Vittorio Veneto (TV), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.