NordCap Cough protection with heat bridge WB HS E-21-40 HP, 400 mm high, ESG disc straight, for heating plates HP GN

Product details

The NordCap cough protection with heat bridge WB HS E-2-1-40 HP adds a straight ESG disc with LED lighting to HP GN hot plates and can only be used with these devices.

The WB HS E-2-1-40 HP is a cough protection with heat bridge for exclusive use with devices of the series HP GN, according to NordCap it can only be combined with heating plates of this series. With external dimensions of 870 x 620 x 400 mm (W x D x H) it forms a solid glass structure over the display. At NordCap, it belongs to the product group of cough protectors, uncooled glass bodies and neutral SB-vistrins.

The cover glass is a straight ESG disc. The construction of round tube supports with a diameter of 38 mm is carried, an LED lighting is integrated. The electrical wiring runs in the round tube and is loosely led out. The cough guard is fixed via counter thread M20 for screwing into the on-site worktop with a thickness of 70 mm.

The exterior and interior cladding are made of stainless steel CNS 1.4301, the viewing sides are ground. The cough protection is manufactured in Austria. NordCap provides a product data sheet, a operating instructions, a declaration of conformity, a dimensional drawing, a contract text and AutoCAD-2D data.

For the heat bridge, an electrical connection value of 0.86 kW at 230 V, 1-phase, 50 Hz is indicated. Commercial heat devices are not subject to any EPREL marking requirements, this also applies to this cough protection with heat bridge. When planning, it should be noted that the construction can only be used together with a device of the series HP GN, which is available separately.

• 1 x cough protection with heat bridge WB HS E-21-40 HP

• Manufacturer item number: 484535016
• Suitable: for exclusive use with HP GN series devices
• External dimensions (W x D x H): 870 x 620 x 400 mm
• Disc: ESG, straight
• Carrier: round tube, Ø 38 mm
• Lighting: LED
• Electrical wiring: loosely drawn out in the round tube downwards
• Mounting: counter thread M20 for screwing in on-site worktop, thickness 70 mm
• Connection: 0.86 kW, 230 V, 1-phase, 50 Hz
• exterior facing: CNS 1.4301, face-ground
• Internal facing: CNS 1.4301
• Country of origin: Austria

• Heat bridge for HP GN series heating plates
• Straight ESG disc, 400 mm height
• Integrated LED lighting
• Wiring in the round tube guided
• Fixed fitting with counter thread M20
• Round tube support Ø 38 mm
• stainless steel CNS 1.4301, face-ground

Notes on establishment and operation

Can only be used with devices of the series HP GN. The assembly is carried out by screwing with counter thread M20 into a construction-side worktop, the electrical wiring is carried out loosely in the round tube downwards.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: AKE Ausseer Kühle- und Edelstahltechnik GmbH, Pichl 66, 8984 Bad Mitterndorf, Austria
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.