NordCap Regeneration oven RRO 141 E for 14 x GN 1/1 or EN 600 x 400, touch screen, 30 to 210 °C, 400 V

Product details

The NordCap regeneration oven RRO 141 E regenerates cooled and frozen food to 14 trays for GN 1/1 – as a stand-up unit with LED touch screen and warm-up function.

The RRO 141 E is a stand-up device for the regeneration of chilled and frozen food. The entry temperature may be -18 to +3 °C, working between 30 and 210 °C. As standard, the removable mounting frame accommodates 14 x GN 1/1-76 in the cross-input, alternatively, 28 plates with 200 to 260 mm or 14 plates with 270 to 320 mm diameter can be regenerated. The power is indicated with 50 kg product quantity per cycle. The outer dimensions are 800 x 821 x 1630 mm (W x D x H), the four feet are height adjustable from 180 to 280 mm.

Control is operated by electronic control in the front panel with 4.3 inch LED display, touch screen and multilingual menu guidance, with main switch and start/stop button. Time, temperature and humidity are controlled, a start delay is possible. At the end of the cycle, an acoustic signal sounds, then the device reduces the temperature and keeps the food ready with the warming function.

The full door with snap closure, rotary handle and heat and aging resistant seal is left-hand and can be changed at extra cost, when opening the fan wheel is switched off. The interior of CNS 1.4301 has rounded corners, the frame is removable for cleaning and the maintenance components are easily accessible. The outside is covered with CHR 1.4016, the energy-saving insulation is up to 35 mm thick.

The circulating air heating system works with autoreverse fan wheel operation, a vent valve sits in the top plate, a safety thermostat is installed. A water connection with 1.5 to 5 bar is necessary on the construction side, the water runs through the central cooking room drain. Electrically connected to 400 V (3N, 50 Hz) with 15.50 kW and a protection of 22.4 A, the protection class is IPX4. Optionally available are 1-point, multipoint and needle core temperature sensors, the Climachef system for automatic moisture control, a glass door with separate lighting and frame frames for 15 x GN 1/1 with 70.5 mm, 11 x GN 1/1 or 11 x EN 600 x 400 with 96 mm and 14 x EN 600 x 400 with 76 mm infeed distance. The net weight is 123 kg.

• 1 x regeneration oven RRO 141 E
• 1 x mounting frame, removable, insert distance 76 mm
• 4 x feet, height adjustable 180 to 280 mm

• Manufacturer item number: 437050103E
• Installation type: Stand-up equipment
• Suitability: for the regeneration of chilled and frozen food
• Recording (optional): 14 x GN 1/1-76 (reels across), 28 x plate Ø 200 to 260 mm or 14 x plate Ø 270 to 320 mm
• Mounting frame (standard): for 14 x GN 1/1-76
• Mounting frames (optional): for 15 x GN 1/1-70.5, for 11 x GN 1/1-96, for 14 x EN 600 x 400 (distance 76 mm), for 11 x EN 600 x 400 (distance 96 mm)
• Power: 50 kg Product quantity per cycle
• Input temperature: -18 to +3 °C
• Working temperature: 30 to 210 °C
• External dimensions (W x D x H): 800 x 821 x 1630 mm
• Depth at open door: 1533 mm
• Control: electronic (in front panel), LED display 4.3 inch, touch screen, multilingual
• Control: time, temperature, humidity; start delay, warm holding function
• Heating: recirculation air, autoreverse fan wheel operation, safety thermostat
• Door: 1 x full door, snap closure, rotary handle, door stop left
• Type of energy: electric
• Connection: 15,50 kW, 400 V, 3N, 50 Hz
• Hedging: 22.4 A
• Water connection: construction side, water pressure 1.5 to 5 bar
• Protection class: IPX4 (splashproof)
• Insulation: energy-saving insulation, up to 35 mm
• External facing: CHR 1.4016
• Internal facing: CNS 1.4301
• Weight: 123 kg net
• Country of origin: Italy

• Regenerating chilled and frozen food (input temperature -18 to +3 °C)
• 14 insets GN 1/1, optionally EN 600 x 400 or plate
• LED touch screen 4.3 inch, multilingual
• Time, temperature and humidity control with start delay
• Temperature reduction and holding function at end of cycle
• Height adjustable feet 180 to 280 mm
• Fan wheel stops when opening the door

Notes on establishment and operation

A minimum distance of 100 mm must be observed on the sides and on the rear wall. A water connection (1.5 to 5 bar) is required for the operation. The connection to 400 V three-phase current must be made by an electric specialist force. GN container is not included.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moduline S.R.L., Via dell' Industria 11, 31029 Vittorio Veneto (TV), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.