NordCap Regeneration oven RRFT 20 E for horde carriages 20 x GN 1/1 or plate horde wagons, Climachef

Product details

The NordCap RRFT 20 E regenerative furnace takes up a complete horde car with 20 x GN 1/1 or a plate horde car for 62 plates and regenerates with climachef moisture control by air.

The RRFT 20 E is a regenerative regenerative oven as a stand-up unit for the regeneration of refrigerated or frozen meals in GN containers on horde carts or plates on plate carts. The capacity is given with 72 kg product quantity per cycle. The working temperature range ranges from 30 to 210 °C. The outside dimensions are 969 x 1188 x 1967 mm (W x D x H), the cooking space measures 570 x 860 x 1860 mm.

Control is electronically controlled via the front panel with 4.3 inch LED display, touch screen, multilingual menu navigation, main switch and start/stop button. The climachef system automatically regulates humidity, including time, temperature and humidity control as well as possible start delay. At the end of the cycle, an acoustic signal sounds, the temperature is reduced and the warming function keeps the food ready. A 1-point core temperature sensor and a USB interface for reading HACCP data are standard equipment.

The full door closes with a 3-point closure and heat and aging resistant seal, it is operated by a rotary handle and is hit to the right, not changeable. In the cooking room is attached a stainless steel shock guard, the interior of CNS 1.4301 has rounded corners and a flat stainless steel floor. Outside the device is covered with CHR 1.4016, the energy-saving insulation is up to 35 mm thick, cabling and components are easily accessible.

The recirculating air heating system works with autoreverse fan wheel operation, automatic humidity ventilation and safety thermostat. A built-in water connection with 1.5 to 5 bar is required. Electrically connected to 400 V (3N, 50 Hz) with 12.50 kW and a protection of 18.1 A, the protection class is IPX4. Optionally available are a horde cart for 20 x GN-blech 1/1-65, a plate cart for 62 plates with a diameter of 230 to 310 mm, a thermal ceiling for the horde cart, multipoint and needle core temperature sensor and an adjustable fan speed. The net weight is 204 kg, manufactured in Italy.

• 1 x RRFT 20 E entry-level regeneration furnace
• 1 x 1-point core temperature sensor
• 1 x USB interface for reading HACCP data

• Manufacturer item number: 437052120
• Installation type: Stand-up equipment
• Suitable: for regenerating chilled or frozen meals in GN containers on horde carts or plates on plate carts
• Recording (optional): 1 x horde car for 20 x GN 1/1 (reels lengthwise) or 1 x plate horde car for 62 x plates
• Power: 72 kg Product quantity per cycle
• Working temperature: 30 to 210 °C
• External dimensions (W x D x H): 969 x 1188 x 1967 mm
• Internal dimensions (W x D x H): 570 x 860 x 1860 mm
• Depth with open door: 1909 mm
• Control: electronic (in front panel), LED display 4.3 inch, touch screen, multilingual
• Control: Climachef system, time, temperature, humidity; start delay, warm holding function
• Heating: recirculation air, autoreverse fan wheel operation, safety thermostat
• Door: 1 x full door, 3-point lock, turn handle, right door stop, non-changeable
• Connection: 12.50 kW, 400 V, 3N, 50 Hz
• Hedging: 18,1 A
• Water connection: construction side, water pressure 1.5 to 5 bar
• Protection class: IPX4 (splashproof)
• Insulation: energy-saving insulation, up to 35 mm
• External facing: CHR 1.4016
• Internal facing: CNS 1.4301
• Weight: 204 kg net
• Country of origin: Italy

• Introductory model for Hordenwagen 20 x GN 1/1 or Platehordenwagen for 62 plates
• Climachef system for automatic humidity control
• 1-point core temperature sensor and USB interface for HACCP data as standard
• LED touch screen 4.3 inch, multilingual
• Start delay, temperature reduction and holding function
• stainless steel floor protection in the cooking room, flat stainless steel floor
• Full door with 3-point closure

Notes on establishment and operation

Horde and plate horde trolleys are not included in the scope of delivery and are optionally available. A water connection (1.5 to 5 bar) is required for operation. The connection to 400 V three-phase current must be made by an electrical specialist.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moduline S.R.L., Via dell' Industria 11, 31029 Vittorio Veneto (TV), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.