NordCap Regeneration furnace RRT 161 E, mobile, 2 full doors, for 16 x GN 1/1 or EN 600 x 400, water tank

Product details

The NordCap regeneration oven RRT 161 E is a mobile regeneration oven with two full doors for 16 x GN 1/1 – with retractable water tank and LED touch screen.

The RRT 161 E is a mobile stand for the regeneration of refrigerated food. The standard mounting frame accommodates 16 x GN 1/1-72 in the cross-input, alternatively 32 plates with 200 to 260 mm or 16 plates with 270 to 320 mm diameter can be used. The power is indicated with 58 kg product quantity per cycle, the input temperature is worked at +3 °C, between 30 and 210 °C. The external dimensions are 880 x 825 x 1800 mm (W x D x H). Four rolls with 150 mm diameter, 2 of them with brakes, a circulating rubber floor strip and ergonomic handles for pushing make the device mobile.

Control is operated via an electronic control in the front panel with 4.3 inch LED display, touch screen, multilingual menu navigation, main switch and start/stop button. Time, temperature and humidity are controlled, a start delay is possible. At the end of the cycle, an acoustic signal sounds, after which the device reduces the temperature and keeps the food with the warming function to temperature.

Two full doors with snap closure, each with a rotary handle and heat- and aging-resistant seal close the cooking compartment, the door stop can be changed on the left and factory side at extra cost. The interior of CNS 1.4301 has rounded corners, the outside is covered with CHR 1.4016, the energy-saving insulation is up to 35 mm thick. The frame is removable for cleaning, the maintenance components are easily accessible.

The recirculation air heating system works with autoreverse fan wheel operation, vent valve in the top plate and safety thermostat. Water is provided via a retractable water tank, the waste water is collected in a collection tray at the bottom of the device. Electrically connected to 400 V (3N, 50 Hz) with 6.80 kW and a protection of 9.9 A, the protection class is IPX4. Optionally available are 1-point, multipoint and needle core temperature sensors, the Climachef system for automatic humidity control, a frame for 16 x EN 600 x 400 with 72 mm slot spacing, a glass door with separate lighting, a USB interface for HACCP data and an adjustable fan speed. The net weight is 145 kg.

• 1 x regeneration furnace RRT 161 E
• 1 x mounting frame, removable, insert distance 72 mm
• 4 x castors, of which 2 with brakes, Ø 150 mm

• Manufacturer's item number: 437051161E
• Installation type: Stand-up device (mobile)
• Suitability: for regenerating chilled food
• Recording (optional): 16 x GN 1/1-72 (reels across), 32 x plate Ø 200 to 260 mm or 16 x plate Ø 270 to 320 mm
• Mounting frame (standard): for 16 x GN 1/1-72; optional for 16 x EN 600 x 400 (distance 72 mm)
• Power: 58 kg Product quantity per cycle
• Input temperature: +3 °C
• Working temperature: 30 to 210 °C
• External dimensions (W x D x H): 880 x 825 x 1800 mm
• Depth at open door: 1533 mm
• Control: electronic (in front panel), LED display 4.3 inch, touch screen, multilingual
• Control: time, temperature, humidity; start delay, warm holding function
• Heating: recirculation air, autoreverse fan wheel operation, safety thermostat
• Doors: 2 x full door, snap closure, rotary handle per door, door stop left
• Water supply: retractable water tank, waste water in collection tray (below)
• Type of energy: electric
• Connection: 6,80 kW, 400 V, 3N, 50 Hz
• Hedging: 9,9 A
• Protection class: IPX4 (splashproof)
• Insulation: energy-saving insulation, up to 35 mm
• External facing: CHR 1.4016
• Internal facing: CNS 1.4301
• Weight: 145 kg net
• Country of origin: Italy

• Can be driven on 4 wheels, of which 2 with brakes
• Water tank and waste water collection tray
• 2 full doors, 16 insets GN 1/1 in the cross-input
• LED touch screen 4.3 inch, multilingual
• Time, temperature and humidity control with start delay
• Temperature reduction and holding function at end of cycle
• Circulating rubber floor strip and ergonomic sliding handles

Notes on establishment and operation

The water supply is via the retractable water tank, the waste water is collected in a collection tray below. The connection to 400 V three-phase current must be made by an electric specialist. GN containers are not included.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moduline S.R.L., Via dell' Industria 11, 31029 Vittorio Veneto (TV), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.