NordCap Regeneration oven RRO 101 C for 10 x GN 1/1 or EN 600 x 400, rotary knob operation, 30 to 160 °C

Product details

The NordCap regeneration oven RRO 101 C brings cooled and frozen food to ten inlets for GN 1/1 with air circulation to temperature – with simple electromechanical rotary knob control.

The RRO 101 C is a tabletop machine for the regeneration of chilled and frozen food. The food can be used with an input temperature of -18 to +3 °C, the working temperature range ranges from 30 to 160 °C. 10 x GN 1/1 are taken in the lateral insert, alternatively 20 plates with 200 to 260 mm or 10 plates with 270 to 320 mm diameter. NordCap indicates the output with 36 kg product quantity per cycle. The outer dimensions are 800 x 822 x 1155 mm (W x D x H), with open door 1533 mm depth.

The control is operated via an electromechanical control in the front panel with rotary knob operation and main switch. Time, temperature and humidity are set directly, an acoustic signal is heard at the end of the cycle. A vent valve in the cover plate releases moisture. When ordering together with the device, the standard frame can be replaced ex-works without extra charge by a frame EN 600 x 400 mm or a GN-1-1 frame with an increased slot spacing.

The full door closes with snap closure and heat- and aging-resistant seal and is opened via a rotary handle, while the fan wheel is parked. The door stop can be changed on the left and factory side at an additional cost. The interior of CNS 1.4301 has rounded corners, the frame is removable for cleaning and the maintenance components are easily accessible. Outside the unit is covered with CHR 1.4016, the energy-saving insulation is up to 35 mm thick.

The circulating air heating system works with autoreverse fan wheel operation and safety thermostat. A water connection with 1.5 to 5 bar on the construction side is required, the water runs through the central cooking room drain. Electrically, the RRO 101 C is connected to 400 V (3N, 50 Hz) with 12.50 kW and a protection of 18.1 A, the protection class is IPX4. Optionally available are frames for 10 x EN 600 x 400 with 76 mm or 8 x EN 600 x 400 with 96 mm slot spacing, a glass door with separate lighting, a base frame with 790 x 645 x 840 mm and an external water tank with 3.0 l instead of the solid water connection. The net weight is 93 kg, manufactured in Italy.

• 1 x regeneration oven RRO 101 C
• 1 x frame frame, removable, for 10 x GN 1/1
• 4 x Footsets

• Manufacturer item number: 437050105
• Position type: tableware
• Suitability: for the regeneration of chilled and frozen food
• Mounting (optional): 10 x GN 1/1 (reels across), 20 x plate Ø 200 to 260 mm or 10 x plate Ø 270 to 320 mm
• Frame frames (optional): for 8 x GN 1/1-96, for 10 x EN 600 x 400 (distance 76 mm), for 8 x EN 600 x 400 (distance 96 mm)
• Power: 36 kg Product quantity per cycle
• Input temperature: -18 to +3 °C
• Working temperature: 30 to 160 °C
• External dimensions (W x D x H): 800 x 822 x 1155 mm
• Depth at open door: 1533 mm
• Control: electromechanical (in the front panel), rotary button operation
• Control: time, temperature, humidity
• Heating: recirculation air, autoreverse fan wheel operation, safety thermostat
• Door: 1 x full door, snap closure, rotary handle, door stop left
• Type of energy: electric
• Connection: 12.50 kW, 400 V, 3N, 50 Hz
• Hedging: 18,1 A
• Water connection: construction side, water pressure 1.5 to 5 bar
• Protection class: IPX4 (splashproof)
• Insulation: energy-saving insulation, up to 35 mm
• External facing: CHR 1.4016
• Internal facing: CNS 1.4301
• Weight: 93 kg net
• Country of origin: Italy

• Regenerating chilled and frozen food (input temperature -18 to +3 °C)
• Simple electromechanical rotary knob operation
• Time, temperature and humidity control
• Optionally GN 1/1, EN 600 x 400 or plates
• Fan wheel stops when opening the door
• Interior with rounded corners, frame removable

Notes on establishment and operation

A minimum distance of 100 mm must be observed on the sides and on the rear wall. A water connection (1.5 to 5 bar) is required for the operation. The connection to 400 V three-phase current must be made by an electric specialist force. GN container is not included.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moduline S.R.L., Via dell' Industria 11, 31029 Vittorio Veneto (TV), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.