NordCap Regeneration oven GRE 060 C XXS for 6 x GN 2/3, rotary knob operation, 30 to 160 °C, 230 V

Product details

The NordCap regeneration oven GRE 060 C XXS regenerates refrigerated food on six trays for GN 2/3 – simply operated by a rotary knob and only 550 mm wide.

The GRE 060 C XXS is an electrically heated regeneration oven as a tabletop device for the regeneration of chilled food. It either accepts 6 x GN 2/3-64 in a transverse feed or 6 plates with a diameter of 200 to 320 mm, NordCap specifies the output with 10 kg product quantity per cycle. The input temperature is +3 °C, the working temperature ranges from 30 to 160 °C. The external dimensions are 550 x 610 x 834 mm (W x D x H). The device can be stacked via an optional stack kit and can also be used for wall mounting.

Electromechanically controlled via the front panel with rotary knob control and main switch. Time, temperature and humidity are controlled separately, an acoustic signal sounds at the end of the cycle. A vent valve in the top plate removes moisture from the cooking chamber.

The full door closes with snap closure and heat- and aging-resistant seal and is opened via a rotary handle, while the fan wheel is parked. The door stop can be changed on the left and factory side at an additional cost. The interior of CNS 1.4301 has rounded corners, the outside is covered with CHR 1.4016, the energy-saving insulation is up to 35 mm thick. The frame is removable for cleaning, the maintenance components are easily accessible and a drainage system is integrated.

The recirculating air heating system operates with autoreverse fan wheel operation and safety thermostat. Connected to 230 V (1-phase, 50 Hz) with 3.45 kW and a protection of 15.0 A, a built-in water connection with 1.5 to 5 bar is required. The protection class IPX4 protects against splash water. Optionally available are a double glass door with separate lighting, a frame for 5 x GN 2/3 with 80 mm slot spacing, a stacking kit of exhaust pipe and floor stand, a door stop change ex factory, and a substructure water tank with drawers for water and condensation water. The net weight is 65 kg, manufactured in Italy.

• 1 x regeneration oven GRE 060 C XXS
• 1 x frame frame, removable, insert distance 64 mm
• 4 x Footsets

• Manufacturer item number: 437040360
• Mounting method: Tableware, stackable (with optional stacking kit), optionally also suitable for wall mounting
• Suitability: for regenerating chilled food
• Recording (optional): 6 x GN 2/3-64 (reels across) or 6 x plate Ø 200 to 320 mm
• Mounting frame (standard): for 6 x GN 2/3-64; optional for 5 x GN 2/3-80
• Power: 10 kg Product quantity per cycle
• Input temperature: +3 °C
• Working temperature: 30 to 160 °C
• External dimensions (W x D x H): 550 x 610 x 834 mm
• Depth with open door: 1369 mm
• Control: electromechanical (in the front panel), rotary button operation
• Control: time, temperature, humidity
• Heating: recirculation air, autoreverse fan wheel operation, safety thermostat
• Door: 1 x full door, snap closure, rotary handle, door stop left
• Type of energy: electric
• Connection: 3.45 kW, 230 V, 1-phase, 50 Hz
• Hedging: 15.0 A
• Water connection: construction side, water pressure 1.5 to 5 bar
• Protection class: IPX4 (splashproof)
• Insulation: energy-saving insulation, up to 35 mm
• External facing: CHR 1.4016
• Internal facing: CNS 1.4301
• Weight: 65 kg net
• Country of origin: Italy

• Simple electromechanical rotary knob operation
• Time, temperature and humidity control
• Stackable and optionally also suitable for wall mounting
• Compact width of 550 mm
• Autoreverse fan wheel operation, shut down at door opening
• Interior with rounded corners, frame removable

Notes on establishment and operation

A minimum distance of 100 mm must be observed on the sides and on the rear wall. A water connection (1.5 to 5 bar) is required on the construction side. Before stacking equipment, the final overall height must be taken into account with regard to barrier-free and safe access for the operator. GN containers are not included.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moduline S.R.L., Via dell' Industria 11, 31029 Vittorio Veneto (TV), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.