Saro Multifunction stove gas/electric model TS95C61LX

Product details

The Saro multifunction stoves of the TS95C61 series combine a gas hob with an extra large electric oven and are suitable for use in demanding kitchens, catering, catering or in the professionally equipped cooking area. The model series is available in various housing versions.

The stove has five gas burners, including a wok burner, as well as robust cast iron pot carriers. The 115-litre electric reciprocating air oven offers sufficient cooking space for different preparations and is complemented by an electric grill.

A timer function supports the practical use in everyday kitchens. The devices are pre-set on H-gas, propane gas nozzles are included. Included in the scope of delivery are a baking tray with inserting post and a rust.

The model series is available in Bordeaux, Black and stainless steel. A variant is intended exclusively for use in the Netherlands.

Product advantages

• 5 gas burners: 1 x 1 kW, 2 x 1.75 kW, 1 x 3 kW, and 1 x wok burner 4.25 kW
• Extra large 115 liters electric reciprocating oven
• Electric grill: 1,8 kW
• Cast iron pot racks
• Timer function
• Pre-set on H-gas, propane gas nozzles are included

Technical data

• Material: (case) stainless steel
• 5 gas burners: 1 x 1 kW, 2 x 1.75 kW, 1 x 3 kW, and 1 x wok burner 4.25 kW
• Extra large 115 liters electric reciprocating oven
• Electric grill: 1,8 kW
• Cast iron pot racks
• Timer function
• Pre-set on H-gas, propane gas nozzles are included
• Incl. 1 baking sheet with inserting end and 1 rust
• Energy efficiency class: A (spectrum A+++ to D)
• Weight (net/gross): 61 / 80 kg
• Dimensions: W 900 x D 600 x H 876/942mm
• Internal dimensions: W 760 x D 470 x H 400 mm
• Temperature range: up to 280 °C
• Connection: 230 V - 50 Hz - 2.7 kW
• Baking plate: B 742 x D 390 mm
• Inserting post: B 653 x D 305 mm
• Rust: W 752 x D 400 mm
• On-site service

Service

On-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: Manufacturer: Bertazzoni S.P.A. - Via Palazzina 8 - 42016 Guastalla -ITALY / ITALY - Tel.: +39 0522 226487 - Isolali@bertazzoni.com - www.bertazzoni.com

EU responsible person: Not required. Manufacturer is located in the EU.

• Place the device only on a stable, horizontal and heat-resistant surface.
• Children and unauthorised persons must not use the device or be close to it unattended.
• Accessible parts, including the oven and burner, can become very hot during operation. There is a risk of combustion – be careful when touching.
• When using oil or fat, never leave them unattended, as they are easily flammable.
• Ensuring that room ventilation meets the requirements. Poor ventilation can lead to dangerous gas accumulation.
• Only qualified professionals may be involved in the installation and maintenance of the equipment.
• Do not use sprays, chemicals or flammable substances near the device on.
• Never clean with water jet or steam cleaner; this can cause short circuit and electric shock.
• Damaged cables or plugs may not be used. A replacement must be done by qualified personnel.
• Before any cleaning, maintenance or prolonged non-use, turn off the device, disconnect from the power grid and let it cool completely.
• The installation of the device shall be such that it is protected from tipping over.
• The glass cover, if available, must be cooled before closing, otherwise there is a risk of breakage.
• When opening the oven, turn the face and head away from the door to avoid steam burns.
• If a gas odour is detected, close the gas tap immediately, vent the room and avoid open flames.
• In the event of visible damage or malfunctions, immediately adjust the operation and contact qualified personnel.