NordCap Regeneration oven GRE 060 EW XXS for 6 x GN 2/3, LCD touchscreen, climachef, also for wall mounting

Product details

The NordCap regeneration oven GRE 060 EW XXS regenerates refrigerated food on six trays for GN 2/3 and can be used as a tableware or optionally on the wall.

The GRE 060 EW XXS is an electrically heated regeneration oven for the regeneration of refrigerated food. It is designed as a tableware and can also be used for wall mounting. 6 x GN 2/3 are taken in the cross-infeed or 6 plates with 200 to 320 mm diameter, the output is 10 kg product quantity per cycle. The input temperature is +3 °C, working between 30 and 210 °C. The outer dimensions are 550 x 673 x 851 mm (W x D x H), the body measures 550 x 610 x 793 mm.

The electronic controller combines an LCD touchscreen with rotary knob operation: time, temperature and function knob, main switch and start/stop button are directly accessible. The climachef system automatically controls the humidity. In addition, there is a warm-up and pre-heating function, programmable cooking phases, a self-diagnosis system and an acoustic signal at the end of the cycle.

The full door with snap closure and rotary handle is hit on the left, the door stop can be changed on the factory side at an additional cost. The fan stops when the door is opened. The interior of CNS 1.4301 has rounded corners, the outside is covered with CHR 1.4016, the energy-saving insulation of mineral wool is up to 35 mm thick. The frame can be removed for cleaning, cabling and components are easily accessible, a drainage system and a central cooking room drain are integrated.

Heat is heated by a recirculation air heating system with autoreverse fan wheel operation, safety valve and safety thermostat. The connection is made to 230 V (1-phase, 50 Hz) with 3.60 kW and a protection of 15.7 A. A water connection with 1.5 to 5 bar water pressure is required on the construction side. IPX4 protects against splash water. Optionally available are 1-point, multipoint and needle core temperature sensors, a mount frame for 5 x GN 2/3 with 80 mm slot spacing, a USB interface for HACCP data, an adjustable fan speed, an external hand shower and a substructure water tank. The net weight is 65 kg, the country of origin is Italy.

• 1 x regeneration furnace GRE 060 EW XXS
• 1 x frame frame, removable, insert distance 64 mm
• 4 x Footsets

• Manufacturer item number: 437040260
• Mounting method: tableware, optionally also suitable for wall mounting
• Suitability: for regenerating chilled food
• Recording (optional): 6 x GN 2/3 (reels across) or 6 x plate Ø 200 to 320 mm
• Power: 10 kg Product quantity per cycle
• Input temperature: +3 °C
• Working temperature: 30 to 210 °C
• External dimensions (W x D x H): 550 x 673 x 851 mm
• Body dimensions (W x D x H): 550 x 610 x 793 mm
• Depth with open door: 1369 mm
• Control: electronic, LCD touchscreen, rotary knob operation
• Cleaning system: series
• Heating: recirculation air, autoreverse fan wheel operation, safety thermostat
• Door: 1 x full door, snap closure, rotary handle, door stop left
• Type of energy: electric
• Connection: 3.60 kW, 230 V, 1-phase, 50 Hz
• Hedging: 15.7 A
• Water connection: construction side, water pressure 1.5 to 5 bar
• Protection class: IPX4 (splashproof)
• Insulation: energy-saving insulation (mineral wool), up to 35 mm
• External facing: CHR 1.4016
• Internal facing: CNS 1.4301
• Weight: 65 kg net
• Country of origin: Italy

• Optionally also suitable for wall mounting
• Climachef system for automatic humidity control
• LCD touchscreen combined with rotary controls for time, temperature and function
• Programmable cooking phases, holding and preheating function
• Cleaning system as standard
• Self-diagnosis system, fan stop after door opening
• Compact width of 550 mm

Notes on establishment and operation

A minimum distance of 100 mm must be observed on the sides and on the rear wall. A water connection (1.5 to 5 bar) on the side of the building is required.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moduline S.R.L., Via dell' Industria 11, 31029 Vittorio Veneto (TV), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.