Saro beverage cooler with billboard, model GTK 282 M

Product details

The Saro beverage refrigerators of the GTK series are suitable for catering, kiosk, sales room, hotel, bistro, canteen or self-service areas. They are designed for refrigerated storage and sales promotion of beverages.

The units have double-glazed, lockable and self-closing glass doors. Height-adjustable gratings allow flexible interior use for different bottle and container sizes. The LED interior lighting supports a clear view of the contents.

Depending on the model, the beverage refrigerators are equipped with analogue temperature control or digital temperature control. The cooling is performed statically with recirculating air fan or via recirculating air cooling.

The series includes different sizes, single and two-door versions and variants with advertising board. This allows the devices to be selected according to the available space, the desired capacity and the presentation situation.

Product advantages

• With billboard - white, neutral display installed (colour display with Saro logo included as replacement)
• Door lockable, self-locking, double glazed
• 4 height-adjustable rusts
• LED lighting, interior and billboard separately switchable
• Analog temperature control
• Static cooling with air ventilator

Technical data

• Material: (case) steel inflammated, white; (indoor) plastic, white; (glass door frame) plastic, black
• With billboard - white, neutral display installed (colour display with Saro logo included as replacement)
• Door lockable, self-locking, double glazed
• 4 height-adjustable rusts
• LED lighting, interior and billboard separately switchable
• Analog temperature control
• Static cooling with air ventilator
• Temperature range: 0 / +10 °C
• Connection: 230 V - 50 Hz - 0.225 kW
• Rusts: 4x W 422 x D 380 mm
• Content (gross/net): 282/260 litres
• External dimensions: W 530 x D 590 x H 1845 mm
• 2 height-adjustable feet front, 2 wheels rear
• Weight (net/gross): 69 / 70 kg
• Refrigerant: R600a
• Energy efficiency class: D (Spectrum A to G)
• NO on-site service

Service

No on-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: Manufacturer: Saro Gastro-Products GmbH - Sandbahn 6 - 46446 Emmerich am Rhein - GERMANY / GERMANY - info@saro.de - www.saro.de

EU responsible person: Not required. Manufacturer is located in the EU.

• Place the device exclusively on a stable, horizontal and non-slip surface.
• Ensure that the mains voltage matches the information on the type plate.
• After transporting or tilting the device over 45 degrees, leave the device upright for at least 24 hours before it is switched on to avoid damage to the cooling circuit.
• Ventilation slots and openings shall not be blocked to ensure optimum air circulation and cooling.
• The device must not be operated near heat sources or direct sunlight.
• Children and unauthorised persons must not use the device or be close to it unattended.
• Do not store flammable, explosive or chemical substances in the device.
• Never clean with water jet or dip into liquids to avoid short-circuit and electric shock.
• Do not put hot food or open liquids in the device to avoid condensation or icing problems.
• Damaged cables or connectors may not be used; replacement only by qualified personnel.
• Before any cleaning, maintenance or prolonged non-use, turn off the device and disconnect it from the power grid.
• The device is intended exclusively for the cooling and storage of beverages or food; other applications may cause damage and affect the warranty.
• The refrigerant is combustible; if the cooling circuit is damaged, air the room well and avoid open flames.
• After a power failure or disconnecting the power connector wait at least 5 minutes before the device is switched on again to avoid damage to the compressor.
• Repairs and maintenance work may only be carried out by qualified personnel.
• When transporting the device, make sure that the adjusting feet do not damage the power cable.
• In the event of visible damage or malfunctions, immediately adjust the operation and contact qualified personnel.
• Be careful when handling the glass door. Do not lean or hit any heavy objects against the door. Do not use the door in case of visible cracks or damage and have it replaced immediately by qualified personnel.
• For cleaning use only mild cleaning agents and clean the capacitor at least monthly to avoid dust deposits.