Saro Bain Marie Model BMH 160-2

Product details

The Saro Bain Marie model BMH 160-2 is designed for professional use in catering, buffet areas, canteens, catering and large kitchens. With its double design, it is ideal for keeping several dishes warm in GN containers at the same time and supports reliable food counters with higher demands.

The unit is made of stainless steel and is therefore robust, durable and easy to clean. The seamless upper edge as well as the deep drawn inner containers support hygienic work and facilitate cleaning during daily operation.

The Bain Marie is suitable for 2 x 1/1 GN-, 4 x 1/2 GN- or 6 x 1/3 GN container with a depth of up to 150 mm. Thus, different food, side dishes or components can be kept warm in parallel and provided clearly.

The temperature can be adjusted according to requirements via the adjustable thermostats. The control lamps indicate the operating state, while the on/off switch enables easy operation. The integrated drain taps facilitate the emptying of the water baths and simplify cleaning after use.

Due to the large capacity, low consumption and the long-lasting design, the BMH 160-2 is a practical solution for professional output areas with regular heat retention requirements.

Product advantages

• For 2 x 1/1 or 4 x 1/2 or 6 x 1/3 GN containers up to 150 mm depth
• With on/off switch
• With drain valve
• Seamless upper edge, inner container deep drawn
• Regulable thermostat and control lamp
• Dimensions incl. drain valve

Technical data

• Material: stainless steel
• For 2 x 1/1 or 4 x 1/2 or 6 x 1/3 GN containers up to 150 mm depth
• With on/off switch
• With drain valve
• Seamless upper edge, inner container deep drawn
• Regulable thermostat and control lamp
• Dimensions incl. drain valve
• Weight (net/gross): 15/17 kg
• Dimensions: W 690 x D 600 x H 245
• Temperature range: 0 / +100 °C
• Connection: 230 V - 50/60 Hz - 2 x 1 kW
• NO on-site service

Service

No on-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: Manufacturer: Saro Gastro-Products GmbH - Sandbahn 6 - 46446 Emmerich am Rhein - GERMANY / GERMANY - info@saro.de - www.saro.de

EU responsible person: Not required. Manufacturer is located in the EU.

• Before first use, clean with warm water and a mild detergent and dry all surfaces.
• Place the device only on a stable, dry and non-slip surface.
• Make sure the power supply matches the information on the type plate.
• Fill the device only with the indicated amount of water (at least 2.5 cm, maximum 5 cm).
• Use only GN containers with a maximum depth of 150 mm
• During operation, the surfaces of the device can become hot, be careful of burns.
• Do not use equipment outdoors or in damp rooms to avoid short circuits or damage.
• Never use adapters or extension cables.
• In case of a malfunction, disconnect the device from the power grid and notify the dealer.
• Before each cleaning, pull the power plug and let the device cool completely.
• Do not use metal sponges or aggressive detergents to avoid damage.
• Use device only for keeping food warm, abusive use can cause damage.
• Keep children and unauthorized persons away from the device.
• In the event of damage to the power cable or device immediately adjust the operation and contact specialists.