Saro refractor, glass door - white, model ARV 430 CS PV

Product details

The Saro refrigerators of the ARV-430 series are suitable for refrigerated storage of food and beverages in catering, large kitchens, canteens and other commercial kitchen areas.

The white plastic interior is equipped with four height-adjustable, plastic-coated gratings. This allows the storage area to be flexibly adapted to different container and product sizes. The self-locking and lockable doors support safe operation.

The digital temperature control allows a setting of +1 to +8 °C. Static cooling with air ventilator supports a uniform temperature distribution, while automatic defrosting facilitates daily operation.

The series is available with white plastic coated steel or stainless steel housing. Depending on the model, closed doors or glass doors with separately switchable LED interior lighting are available. Rolls and adjustable feet facilitate positioning at the site of use.

Product advantages

• 1 door, self-locking, lockable
• 4 height-adjustable, plastic-coated rusts
• LED interior lighting (1x 14,4 W), separately switchable
• Digital temperature control
• Water-based polyurethane insulation, 50 mm
• Static cooling with air ventilator

Technical data

• Material: (case) steel plastic coated, white; (indoor) plastic, white; glass door; (door frame) plastic, white
• 1 door, self-locking, lockable
• 4 height-adjustable, plastic-coated rusts
• LED interior lighting (1x 14,4 W), separately switchable
• Digital temperature control
• Water-based polyurethane insulation, 50 mm
• Static cooling with air ventilator
• Automatic defrosting
• Suitable for climate class 4
• Temperature range +1 / +8 °C
• Connection: 230 V - 50 Hz - 0.170 kW
• Rusts: 4x W 495 x D 428 mm
• Capacity (gross/net): 386 / 308 litres
• Internal dimensions: B 477 x D 470 x H 1590 mm
• External dimensions: W 590 x D 600/645 x H 1860 mm
• 4 castors + 2 adjustable feet (H 25 mm)
• Weight (net/gross): 84 / 95 kg
• Refrigerant: R600a
• Energy efficiency class: B (Spectrum A to G)
• On-site service

Service

On-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

• Place the device only on a stable, horizontal and non-slip surface.
• Ensure that the mains voltage matches the information on the type plate.
• After transport or strong inclination of the device, allow to stand upright for at least 24 hours before it is switched on to avoid damage to the cooling circuit.
• Children and unauthorised persons must not operate the device or be unattended near the device.
• Do not store flammable, explosive or chemical substances in the device.
• Vents and vents must not be blocked to avoid overheating.
• Device never dip in water or clean with water jet; short circuit and electric shock risk.
• In case of visible damage or malfunctions immediately stop operation and contact the dealer.
• Do not put hot food or open liquids in the device to avoid condensation or icing problems.
• Use only original spare parts and accessories that are approved for the device.
• Do cleaning only with the device switched off and separated from the power grid.
• Equipment is intended exclusively for the storage and cooling of food; other applications may cause damage and affect the warranty.
• The refrigerant is flammable; in case of a leak, air the room well and avoid open fire.
• After a power outage or a short pull-off of the power plug wait at least 5 minutes before the device is switched on again to avoid damage to the compressor.
• Be careful when handling the door (glass). Do not lean or hit heavy objects against the door. Do not use the door in case of visible cracks or damage and have it replaced immediately by qualified personnel.
• Repairs and maintenance work may only be carried out by qualified personnel.