Saro refrigerator model ARV 430 CS A PO

Product details

The Saro refrigerators of the ARV-430 series are suitable for refrigerated storage of food and beverages in catering, large kitchens, canteens and other commercial kitchen areas.

The white plastic interior is equipped with four height-adjustable, plastic-coated gratings. This allows the storage area to be flexibly adapted to different container and product sizes. The self-locking and lockable doors support safe operation.

The digital temperature control allows a setting of +1 to +8 °C. Static cooling with air ventilator supports a uniform temperature distribution, while automatic defrosting facilitates daily operation.

The series is available with white plastic coated steel or stainless steel housing. Depending on the model, closed doors or glass doors with separately switchable LED interior lighting are available. Rolls and adjustable feet facilitate positioning at the site of use.

Product advantages

• 1 door, self-locking, lockable
• 4 height-adjustable, plastic-coated rusts
• Digital temperature control
• Water-based polyurethane insulation, 50 mm
• Static cooling with air ventilator
• Automatic defrosting

Technical data

• Material: (housing) stainless steel; (indoor) plastic, white
• 1 door, self-locking, lockable
• 4 height-adjustable, plastic-coated rusts
• Digital temperature control
• Water-based polyurethane insulation, 50 mm
• Static cooling with air ventilator
• Automatic defrosting
• Suitable for climate class 4
• Temperature range +1 / +8 °C
• Connection: 230 V - 50 Hz - 0.180 kW
• Rusts: 4x W 495 x D 428 mm
• Capacity (gross/net): 386 / 308 litres
• Internal dimensions: B 477 x D 470 x H 1590 mm
• External dimensions: W 590 x D 600/645 x H 1860 mm
• 4 castors + 2 adjustable feet (H 25 mm)
• Weight (net/gross): 76 / 87 kg
• Refrigerant: R600a
• Energy efficiency class: D (Spectrum A+++ to E)
• On-site service

Service

On-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

• Place the device exclusively on a stable, horizontal surface.
• Ensure that the mains voltage matches the information on the type plate.
• Children and unauthorised persons must not use the device or use it improperly.
• Never clean device with water jet to avoid short-circuit danger.
• After transporting the device, it must stand upright for at least 24 hours before it is switched on to prevent damage to the refrigerant circuit.
• The device must not be operated near heat sources, direct sunlight or in damp rooms.
• For adequate ventilation, keep at least 10 cm distance from the rear wall and 30 cm upwards.
• The ventilation area must always be free of dust and obstacles to ensure optimum cooling performance.
• The refrigerant is combustible – it is essential to avoid damage to the cooling circuit and in case of a leak, air the room well. Avoid open fire or sparking.
• In case of visible damage or malfunctions immediately stop operation and contact the dealer.
• Before any cleaning, maintenance or prolonged non-use, pull the power plug and let the device defrost completely.
• The cleaning of the condenser slots should be carried out regularly to remove dust deposits and maintain efficiency.
• Repairs and maintenance work may only be carried out by qualified personnel.