Saro Sensor faucet -230V- Model POSEIDON

Product details

The Saro Sensor faucets NEPTUN and POSEIDON enable contactless water output in kitchens, hand washing areas and other hygienically sensitive areas of application.

An infrared sensor activates the flow of water without the armature having to be operated with the hands. After a specified flow time, the water supply is automatically terminated. An additional safety shutdown limits the continuous operation.

The swivelling arm and the increased outlet expand the usable area above the pool. An automatic cleaning run is triggered after prolonged non-use.

The series includes a battery-powered version as well as a model for the power supply. Batteries are not included in the battery-powered version.

Product advantages

• With infrared sensor
• With swivel arm and extra high outlet (200 mm)
• Flow time: 7.5 sec.
• Safe shutdown after 5 min continuous operation
• Automatic cleaning run every 24 hours after last use
• Side lever

Technical data

• With infrared sensor
• With swivel arm and extra high outlet (200 mm)
• Flow time: 7.5 sec.
• Safe shutdown after 5 min continuous operation
• Automatic cleaning run every 24 hours after last use
• Side lever
• Weight (net/gross): 1,7 / 2 kg
• Connection: 230 V - 50 Hz - 0.06 kWh
• NO on-site service

Service

No on-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: Manufacturer: Saro Gastro-Products GmbH - Sandbahn 6 - 46446 Emmerich am Rhein - GERMANY / GERMANY - info@saro.de - www.saro.de

EU responsible person: Not required. Manufacturer is located in the EU.

• The device is intended exclusively for indoor use and must be installed on a stable and flat surface.
• Installation and repairs may only be carried out by qualified personnel to ensure safety.
• The faucet is designed for a minimum operating pressure of 0.5 bar and a maximum pressure of 4 bar. These values must not be exceeded to avoid damage.
• The infrared sensor must not be blocked or concealed to prevent the automatic function of the faucet.
• The faucet must perform self-calibration before first use – during this time no hands or objects hold in front of the sensor.
• The device is intended for use with clean, particle-free water. If necessary, a suitable filter must be installed.
• Device never clean with water jet or dip in liquids, as there is a risk of short circuit and electric shock.
• Before cleaning or maintenance, the device must be separated from the power grid.
• Dispose of packaging materials safely and keep them out of the reach of children as they may pose a risk of suffocation.
• In the event of visible damage or malfunctions, immediately adjust the operation and contact qualified personnel.
• The faucet and the power supply must be properly disposed of at the end of their life and returned to the recyclable material.