Saro Hairdryer Model JEREMY

Product details

The Saro hair dryers JOSHUA and JEREMY are designed for use in hotel rooms, guest rooms, sanitary areas, changing rooms and similar commercial areas. They provide a practical solution for the permanently installed provision of a hairdryer.

The devices are made of plastic and are equipped with a wall mount. Thus they can be mounted space-saving and are available to guests or users directly at the intended location.

Both models have two temperature and ventilation stages as well as an on- and off-switch. The operation is carried out by a push button. The air speed is 14 m/s each.

The models differ in design and equipment. The model JOSHUA also has a socket for razors, while the model JEREMY is equipped with a wall mount including approx. 1.4 m power cable with Schuko plug.

Product advantages

• 2 temperature/ventilation steps
• On/off switch
• Operation by push button
• Wall bracket with approx. 1.4 m mains cable with Schuko plug
• Air speed: 14 m/s

Technical data

• Material: Plastic
• 2 temperature/ventilation steps
• On/off switch
• Operation by push button
• Wall bracket with approx. 1.4 m mains cable with Schuko plug
• Air speed: 14 m/s
• Weight (net/gross): 0,7 / 0,8 kg
• Dimensions: W 97 x D 158 x H 206 mm
• Connection: 230 V - 50 Hz - 1.2 kW
• NO on-site service

Service

No on-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: Manufacturer: Saro Gastro-Products GmbH - Sandbahn 6 - 46446 Emmerich am Rhein - GERMANY / GERMANY - info@saro.de - www.saro.de

EU responsible person: Not required. Manufacturer is located in the EU.

• The device must not be installed above a sink, near showers or other water sources.
• The hairdryer is exclusively for indoor use.
• Children and unauthorized persons may not use the device improperly.
• Never use the device with wet hands.
• In case of visible damage to the device or mains cable immediately adjust the operation and have the device repaired.
• An installation with an error circuit breaker (FI switch) is strongly recommended in order to minimize the risk of an electric shock.
• The device must not come into contact with water or be sprayed.
• During use do not cover the ventilation intakes and outlets.
• Damaged power cables may only be repaired or replaced by qualified personnel.
• The device is intended exclusively for hair drying; any other use may cause damage or affect the warranty.