NordCap combi steamer EK 6 x GN 1/1, electric, up to 300 °C, core temperature sensor, self-cleaning

Product details

The NordCap combi steamer EK 6 x GN 1/1 combines boilerless steam function and AirFlow air distribution with core temperature sensors, HACCP interface and automatic self-cleaning.

The EK 6 x GN 1/1 is an electrically heated combi steamer as a tabletop unit for GN 1/1 in the longitudinal infeed. NordCap refers to 6 x GN 1/1-65 as a storage and storage area, the standard support frame has a slot spacing of 65 mm. With external dimensions of 867 x 775 x 808 mm (W x D x H), the device can also be accommodated in smaller kitchens, with the optional special accessories it can be stacked. The working temperature reaches up to 300 °C, steam is produced boilerless.

Control is electronically controlled via the front panel with digital display, main switch and start/stop button. The equipment includes an automatic quick-cooldown, an automatic pre-heating function, self-diagnosis and program storage spaces for recipes. The AirFlow air distribution system works with 5-stage adjustable fan speed and reverse function. A 1-point core temperature sensor is standard, HACCP data can be read out via the USB and WLAN interface.

The exterior and interior cladding are made of CNS 1.4301, the cooking room has rounded corners and LED interior lighting. The double glass door is made of thermoglas with ergonomic handle and is hit to the right and cannot be changed, when the door is opened the fan wheel is switched off. An automatic self-cleaning program facilitates the maintenance, NordCap mentions five operating modes: Soft, Medium, Strong, Extra Strong and Rinse-only. The IPX5 protection class protects against jet water.

Electrically, the combi steamer is connected to 400 V (3N, 50 Hz) with 11,10 kW. The water is supplied via a solid water connection with 1 to 6 bar water pressure and a water supply temperature of 30 °C. A water flow on the construction side is required. Optionally available are exhaust air hoods with fan motor, a mobile bakery frame for EN 600 x 400, a insert frame with handle, height adjustable feet with 150 to 200 mm as well as GN rust, grill grates and non-stick coated GN container. The net weight is 107 kg, manufactured in Italy.

• 1 x combi steamer EK 6 x GN 1/1
• 1 x 1-point core temperature sensor
• 1 x support frame for GN 1/1, insert distance 65 mm
• 1 x USB and WLAN interface for reading HACCP data
• 4 x feet

• Manufacturer item number: 406228960
• Layout type: Tableware, stackable (with optional special accessories)
• Suitable: for GN 1/1, insert lengthwise
• Storage area: 6 x GN 1/1-65
• Working temperature: up to 300 °C
• Steam production: boilerlos
• Air distribution: AirFlow, fan speed 5-stage adjustable, reverse function
• External dimensions (W x D x H): 867 x 775 x 808 mm
• Depth with open door: 1319 mm
• Control: electronic (in the front panel), digital display
• Type of energy: electric
• Connection: 11,10 kW, 400 V, 3N, 50 Hz
• Water connection: fixed water connection, water pressure 1 to 6 bar
• Water supply temperature: 30 °C
• Protection class: IPX5 (pollution-protected)
• Outside facing: CNS 1.4301
• Internal facing: CNS 1.4301
• Door: double-glazed door, thermoglass, door stop right, not interchangeable
• Weight: 107 kg net
• Country of origin: Italy

• Boilerless steam function
• AirFlow air distribution with 5-stage fan speed and reverse function
• 1-point core temperature probe as standard
• HACCP data can be read out via USB and WLAN interface
• Automatic self-cleaning program
• Program memory for recipes, automatic preheat function and quick cooldown
• LED interior lighting, fan stop at door opening

Notes on establishment and operation

Supplied without GN-tragross. A fixed water connection (1 to 6 bar) and a water flow on the side of the building are required. A minimum distance of 50 mm must be observed to the sides and to the rear wall. Before stacking devices, the final overall height must be taken into account in terms of barrier-free and safe access for the operator. The connection to 400 V three-phase current must be made by an electrical specialist.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.