Saro Rinse cabinet with sliding doors 1400mm, 1 basin right

Product details

The Saro sinks combine a professional rinsing area with closed storage space. They are suitable for catering, large kitchen, canteen, catering and other areas with regular cleaning work.

The work surface is made of AISI-304-stainless steel and has three drain protection edges and a rear-facing upgrade. The deep-drawn basins offer sufficient space for rinsing and preparation work. Depending on the design, models with folding doors or sliding doors as well as one or two basins are available.

The missing rear wall allows good access to water and wastewater pipes. Height adjustable stainless steel feet facilitate alignment. Overflow pipe, stopper and U-bridge are included.

With the variants with drain surface, this can be arranged left or right depending on the model. Different widths and basin sizes allow adaptation to different workflows.

Product advantages

• Work surface with three drain protection edges, made of stainless steel AISI 304, welded to the housing of the unit
• Stainless steel frame + AISI 430 stainless steel door
• Reinforced work surface by underfeeding with laminated chipboard
• upstand, 100 x 20 mm (replacement: 100 mm)
• No back wall for easy access for pipes
• Sliding doors suspended on top of a rail with stop limit

Technical data

• Work surface with three drain protection edges, made of stainless steel AISI 304, welded to the housing of the unit
• Stainless steel frame + AISI 430 stainless steel door
• Reinforced work surface by underfeeding with laminated chipboard
• upstand, 100 x 20 mm (replacement: 100 mm)
• No back wall for easy access for pipes
• Sliding doors suspended on top of a rail with stop limit
• Stainless steel feet, height adjustable, diameter 60 mm
• Delivery with overflow tube, stopper and U-bending
• Abm.: B 1400 x T 700 x H 850 mm
• 1 sink on the right, 1 drain surface on the left
• Measurement basin: W 600 x D 500 x H 300 mm
• Weight (net/gross): 61,3 / 80,3 kg
• NO on-site service

Service

No on-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

• The table must be installed on a stable, flat and non-slip surface to avoid tipping or slipping.
• No abrasive cleaning agents or metal sponges may be used to clean the sink to prevent damage to the stainless steel surfaces.
• The water flow must be checked and cleaned regularly to avoid constipation and to ensure proper functioning.
• The table should not be burdened with heavy or pointed objects that could damage the surface.
• Safely dispose of packaging materials to avoid suffocation risks.
• The sliding doors are light, but should be cleaned and tested regularly to ensure smooth operation.
• Regular inspections of welds and joints are required to ensure stability and safety.
• Do not use the sink in case of visible damage and contact qualified personnel.