Saro High-speed hand dryer model SARMA

Product details

The Saro High-Speed Hand Dryer SARMA is suitable for professional use in laundry rooms of gastronomy, hotel industry, public areas, industry, sports facilities and other commercial facilities. Through contactless operation, the device supports hygienic hand drying without direct contact.

The housing is made of plastic and is designed for wall mounting in sanitary rooms. With its slim design, the hand dryer can be integrated space-saving and offers a modern solution for heavily frequented laundry areas.

SARMA dries the hands within 5 to 10 seconds. The air speed is 110 m/s. Depending on requirements, drying can be done with warm or cold air.

The device is processor-controlled and equipped with LED display as well as lighting. A hygiene filter filters up to 99% of the germs from the air stream and thus supports the use in hygienically sensitive areas.

Product advantages

• Non-contact operation
• Dries hands in 5 - 10 seconds
• Air speed: 110 m / s
• Dries optionally with warm or cold air
• Processor controlled, with LED display and lighting
• Hygiene filter, filters up to 99% of the germs from the air stream

Technical data

• Material: Plastic
• Non-contact operation
• Dries hands in 5 - 10 seconds
• Air speed: 110 m / s
• Dries optionally with warm or cold air
• Processor controlled, with LED display and lighting
• Hygiene filter, filters up to 99% of the germs from the air stream
• Weight (net/gross): 8,5 / 10,4 kg
• Dimensions: W 300 x D 250 x H 680 mm
• Connection: 230 V - 50 Hz - 1.4 kW
• NO on-site service

Service

No on-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: Manufacturer: Saro Gastro-Products GmbH - Sandbahn 6 - 46446 Emmerich am Rhein - GERMANY / GERMANY - info@saro.de - www.saro.de

EU responsible person: Not required. Manufacturer is located in the EU.

• Mount the device exclusively on a stable, horizontal and heat-resistant surface.
• Ensure that the mains voltage matches the information on the type plate.
• The hand dryer must be grounded according to local regulations. An incorrect grounding can lead to electric shock and severe injuries.
• Children and unauthorised persons may not use the device improperly.
• During installation and maintenance, the hand dryer must be separate from the power supply.
• A sufficient safety distance must be maintained between the hand dryer and water sources (e.g. sinks).
• Vents shall not be blocked or covered.
• In the event of visible damage or malfunctions, immediately stop operation.
• Cleaning only with a soft cloth and mild cleaning solution; water or aggressive cleaning agents must not enter the device.
• Repairs and maintenance work may only be carried out by qualified personnel.
• The hand dryer is intended exclusively for indoor use and drying of hands; any other use can cause damage and affect the warranty.
• In areas with high humidity or wetness, the use of a fault current protection switch (FI switch) is mandatory.