Saro convection oven with grill model EKO 595

Product details

The Saro hot air ovens of the EKO series are suitable for baking, cooking, heating and grilling in catering, large kitchen, bistro and catering. Two fans support a uniform distribution of the hot air in the cooking room.

The units are made of stainless steel and are operated manually via knobs. The additional grilling function expands the preparation possibilities. A timer supports the control of the set cooking time.

Depending on the model, the furnaces are designed for different sheet metal formats or for four grates or sheets in 1/1 GN format. The GN versions are available with right or left door stop as well as with folding door opening downwards. Delivery is without grates and sheets.

Product advantages

• Manual control with knobs
• Distance between the rusts 84 mm
• 2 fans + grill
• Capacity: 4 x 435 x 350 mm or 450 x 325 mm
• Delivery without rusts

Technical data

• Material: stainless steel
• Manual control with knobs
• Distance between the rusts 84 mm
• 2 fans + grill
• Timer
• Capacity: 4 x 435 x 350 mm or 450 x 325 mm
• Delivery without rusts
• Weight (net/gross): 33 / 39 kg
• Dimensions: B 589 x D 660 x H 580
• Temperature range: max. +280 °C
• Connection: 230 V - 50 Hz - 3.15 kW, grill power: 1.7 kW
• NO on-site service

Service

No on-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: Tecnodom S.p.A. - Via Isonzo, n. 3-5 - 35010 - Vigodarzere (Padova) - ITALY / ITALY - Tel.: +39 049 8874215 - info@tecnodomspa.com (general one) - www.tecnodomspa.com

EU responsible person: Not required. Manufacturer is located in the EU.

• The device is intended exclusively for professional indoor use.
• The device must be placed on a stable, flat and heat-resistant surface.
• Ensure that the mains voltage matches the information on the type plate.
• The rear wall on which the apparatus is installed shall be made of non-combustible material and a distance of at least 10 cm from walls or obstacles shall be maintained to ensure adequate ventilation.
• Before first use, protective films must be removed and the device cleaned with a soft cloth and mild detergent.
• During operation, hot vapours can leak out – fire risk! Use suitable protective clothing and gloves.
• The device must not be placed near flammable materials or in environments with high humidity.
• The operation must not be carried out with wet hands to avoid electric shock.
• Before cleaning or maintenance work, the device must be switched off and separated from the power grid.
• No abrasive detergents, metal sponges or high pressure cleaners may be used to prevent damage to electrical parts.
• The mains cable and the connectors must be checked regularly for damage. Damaged cables may only be replaced by specialists.
• In the event of visible damage or malfunctions, the operation must be stopped immediately and qualified personnel must be notified.
• Repairs and technical interventions may only be carried out by authorised personnel.
• The ventilation openings of the device shall not be blocked or covered.
• When using the device, hot surfaces, such as glass doors, sheets and heating coils, can cause combustion – only when the device is cooled down.
• Ensure that no other electrical cables come into contact with the hot surfaces.
• Caution should be exercised when removing the door or other heavy parts, as they may be heavy.
• In the event of a defect, such as a faulty sensor or fan, the device shall not be operated any further.