NordCap Cooling table KKSM 102 with 1 door and 2 GN semi drawers 1/1, 0 to 10 °C, plug-in 230 V

Product details

The NordCap KKSM 102 cooling table combines a full door with two GN half drawers 1/1 and cools plug-in at 0 to 10 °C – sub-assembly and delivered without worktop.

The KKSM 102 is a plug-in cooling table for GN 1/1 gastro-standard containers, which is supplied in the basic equipment without worktop and can be underbuilt. The outer dimensions are 950 x 674 x 809 mm (W x D x H), the body measures 950 x 614 x 800 mm. With a gross capacity of 250 litres, 117 litres of net content are available, the inner dimensions are 870 x 550 x 520 mm. The temperature range ranges from 0 to 10 °C, the cooling table is designed for climate class 4 (+30 °C ambient temperature and 55% relative humidity).

The unit has a self-locking, non-extrusion full door with frame heating, opening position at 95°, CNS handlebar and door stop right as well as two GN half drawers 1/1. The magnetic seals can be changed tool-free. In the door compartment there is as standard a Stellage made of stainless steel and four tilt-proof support rails. The control is controlled by an electronic control system with digital display, the defrosting is done automatically via the compressor heat. When the door is open, the depth is 1120 mm, with open drawer 1300 mm.

Housing and interior are made of stainless steel CNS 1.4301, the viewing sides are ground. The deep-drawn floor with integrated floor drain facilitates the cleaning of the interior, the evaporator is foamed. For maintenance and cleaning, the machine can be pulled out completely. The insulation made of PUR hard foam is up to 50 mm thick, the protection class IPX3 protects against spray water. The cooling table stands on four adjustable feet, optionally available are a GN-tragrost 1/1, grey rilsaniert, with 325 x 530 x 20 mm (W x D x H) and a roller set in reinforced version with 4 wheels, 2 of which with brake.

Cooling is done by circulating air with the natural refrigerant R-290 (propane) with a filling quantity of 50 g and a GWP100 value (AR5) of 3. The cooling capacity is 314 W at -10 °C evaporation temperature, the relative humidity in the interior is 50 to 70 %. The cooling table is plug-in for 230 V with a connection value of 0.22 kW. It reaches energy efficiency class D, energy consumption is 3.00 kWh in 24 hours and 1100 kWh per year. The KKSM 102 is produced in Italy.

• 1 x cooling table KKSM 102 (basic equipment without countertop)
• 1 x Stellage, CNS, per door compartment
• 4 x support rails (2 pcs), tiltproof
• 4 x feet, adjustable

• Manufacturer item number: 402729614
• Suitable: for GN 1/1
• Design: Basic equipment without worktop
• Doors/ drawers: 1 x full door, 2 x GN half drawer 1/1
• Door: self-closing, non-permanent, frame heating, opening at 95°, CNS handlebar, door stop right, magnetic seal (tool-free changeable)
• External dimensions (W x D x H): 950 x 674 x 809 mm
• Body dimensions (W x D x H): 950 x 614 x 800 mm
• Internal dimensions (W x D x H): 870 x 550 x 520 mm
• Depth at open door: 1120 mm, with open drawer: 1300 mm
• Gross content: 250 l, Net content: 117 l
• Temperature range: 0 to 10 °C
• Climate class: 4 (+30 °C ambient temperature, 55% relative humidity)
• Relative humidity: 50 to 70 %
• Installation type: sub-mountable
• Connection type: ready to plug
• Type of cooling: recirculation air cooling, foamed evaporator
• Refrigerant: R-290 (propane), filling quantity 50 g, GWP100 (AR5): 3
• Cooling capacity: 314 W at -10 °C Evaporation temperature
• Control: electronic, digital display
• Defrosting: automatic (compressor waste heat)
• Connection: 0.22 kW, 230 V, 1-phase, 50 Hz
• Energy efficiency class: D
• Energy consumption: 3,00 kWh/24 h, 1100 kWh/year
• Protection class: IPX3 (spray water protected)
• Insulation: PUR hard foam, up to 50 mm
• exterior facing: CNS 1.4301, face-ground
• Internal facing: CNS 1.4301
• Weight: 85 kg net
• Country of origin: Italy

• 1 full door and 2 GN semi drawers 1/1
• Door with frame heating, self-locking and not survive
• Tool-free interchangeable magnetic seals
• Deep drawn floor with integrated floor drain
• Machine for maintenance and cleaning completely pullable out
• Natural refrigerant R-290, plug-in 230 V
• Underbuildable, delivery without countertop

Notes on establishment and operation

The cooling table is supplied in the basic equipment without worktop. In the case of open doors, the unit depth is 1120 mm, with open drawer 1300 mm.

Operating instructions

Download user manual (PDF)

Energy labelling

Energy efficiency class: D
Energy consumption: 1100 kWh/year
EPREL registration number: 1146835
Legal basis: Regulation (EU) 2015/1094
Supplier according to EPREL: Alpeninox
Download energy label (PDF)

Product safety (GPSR)

Manufacturer: ALPENINOX, Viale Treviso 15, 33170 Pordenone, Italy (brand holder: Electrolux Professional S.p.A., Viale Treviso 15, 33170 Pordenone, Italy)
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.