Saro Electric fryer model E7/FRE2V13

Product details

The Saro gas and electric fryer of the Profi-Kochlinie 700 are designed for commercial use in gastronomy, snack food, large kitchen, canteen or snack production. They are suitable for frying larger quantities in continuous kitchen operation.

The units are made of stainless steel and have rounded basins with cold zone. Drain tap and stainless steel catcher facilitate oil change and support practical cleaning.

Depending on the design, gas or electric models are available with one or two basins. Gas models are equipped with piezo-ignitioners, pilot flame and ignition fuse. Electric models have high-folding heating elements that facilitate cleaning.

Safety thermostat and temperature control support controlled operation. The models differ in basin content, basket size, connection performance and device width.

Product advantages

• With drain tap and stainless steel catcher for easy oil change
• Rounded pool with cold zone
• Continuous temperature adjustment up to 190 °C
• High folding heating element allows easy cleaning
• Safety thermostat
• Basket:1 x W 220 x D 300 x H 120 mm 2 x W 109 x D 300 x H 120 mm

Technical data

• Material: stainless steel
• With drain tap and stainless steel catcher for easy oil change
• Rounded pool with cold zone
• Continuous temperature adjustment up to 190 °C
• High folding heating element allows easy cleaning
• Safety thermostat
• Weight (net/gross): 68 / 95 kg
• Dimensions: W 800 x D 700 x H 850 mm
• Basket:1 x W 220 x D 300 x H 120 mm 2 x W 109 x D 300 x H 120 mm
• Content: 2x 13 litres
• Temperature range: 0 /+190 °C
• Connection: 400 V - 50 - 60 Hz - 24 kW
• On-site service

Service

On-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: CASTA S.R.L. - Via F.lli Lumière, 11 - Z.I. Villa Selva - 47122 Forlì (FC) - ITALY / ITALY - Tel. +39 0543 782920 - casta@casta.com - www.casta.com

EU responsible person: Not required. Manufacturer is located in the EU.

• Install only by qualified installers.
• Safely dispose of packaging materials to avoid suffocation risks.
• Clean the device thoroughly before first commissioning and check for visible damage. Do not use in case of damage.
• Ensure that the device is placed on a stable, flat and heat-resistant surface.
• During operation, surfaces can become very hot; risk of combustion! Avoid contact.
• Use only under a suitable hood to safely drain heat and vapour.
• Do cleaning only with a soft cloth and mild detergent; do not use abrasive agents.
• Do not store flammable materials near the device to avoid fire hazard.
• Allow the unit to cool completely after each use and separate from the mains before it is cleaned.
• Keep children and unauthorized persons away from the device to avoid misoperations and injuries.
• In case of visible damage or malfunctions, immediately adjust the operation and contact the personnel.
• Fat fires never extinguish with water; use suitable fire extinguishers.