Saro Electric teppanyaki grill open base model TEB2/120E

Product details

The Saro Gas and Electric Teppanyaki grills of the professional 700 cooking line are suitable for frontcooking, gastronomy, hotel kitchen, event kitchen and sophisticated frying applications. They allow direct preparation of food on a large stainless steel-griddle plate.

Housing and griddle plate are made of stainless steel. A spray protection on three sides, recesses for frying residues as well as removable grease collection containers support clean work. Warm retention zones on the left and right edges complement the use in service operation.

Gas models are equipped with piezo-guns, pilot flames and ignition fuses. Electrical models have a safety thermostat. The versions differ in the width of the device, the number of burners and heating elements and the connection performance.

Product advantages

• Spray guard made of stainless steel on three sides
• 2 heating elements: 2 x 5.4 kW
• Directly under the griddle plate mounted radiators ensure an even heat distribution
• 2 recesses in the griddle plate for frying residues, (front left and right in the corners)
• 2 removable grease collection tanks
• Warm-up zones on the left and right edges

Technical data

• Material: (case and griddle plate) stainless steel
• Spray guard made of stainless steel on three sides
• 2 heating elements: 2 x 5.4 kW
• Directly under the griddle plate mounted radiators ensure an even heat distribution
• 2 recesses in the griddle plate for frying residues, (front left and right in the corners)
• 2 removable grease collection tanks
• Warm-up zones on the left and right edges
• Safety thermostat
• Weight (net/gross): 175 / 175 kg
• Dimensions: W 1200 x D 700/740 x H 850 mm
• Temperature range: 0 /+240 °C
• Connection: 400 V - 50 - 60 HZ -10.8 kW
• On-site service

Service

On-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: CASTA S.R.L. - Via F.lli Lumière, 11 - Z.I. Villa Selva - 47122 Forlì (FC) - ITALY / ITALY - Tel. +39 0543 782920 - casta@casta.com - www.casta.com

EU responsible person: Not required. Manufacturer is located in the EU.

• Install only by qualified installers.
• Safely dispose of packaging materials to avoid suffocation risks.
• Clean the device thoroughly before first commissioning and check for visible damage. Do not use in case of damage.
• Ensure that the device is placed on a stable, flat and heat-resistant surface.
• During operation, surfaces can become very hot; risk of combustion! Avoid contact.
• Do not store flammable materials near the device to avoid fire hazard.
• Clean only with a soft cloth and mild detergent; do not use abrasive or acidic agents.
• Never clean with a water jet or high pressure cleaner.
• Allow the unit to cool completely after each use and separate from the mains before it is cleaned.
• Keep children and unauthorized persons away from the device to avoid misoperations and injuries.
• In case of visible damage or malfunctions, immediately adjust the operation and contact the personnel.