Saro convection oven Model NERINO 3

Product details

The Saro convection oven NERINO 3 is suitable for baking, heating and cooking smaller quantities in gastronomy, bistro, snack and catering. Its compact design allows use even with limited space.

The unit consists of stainless steel and is operated manually via clearly arranged rotary buttons. Hot air ensures an even heat distribution in the cooking room, while the integrated lighting supports the control of the food.

The oven can accommodate three inserts in the 2/3 GN format. The temperature can be set up to a maximum of +280 °C. Rusts are not included.

Product advantages

• Manual control with knobs
• Hot air + light
• Distance between the rusts: 80 mm
• Furnace depth: 370 mm
• Capacity: 3 x 2/3 GN
• Delivery without rusts

Technical data

• Material: stainless steel
• Manual control with knobs
• Hot air + light
• Distance between the rusts: 80 mm
• Furnace depth: 370 mm
• Capacity: 3 x 2/3 GN
• Delivery without rusts
• Weight (net/gross): 25 / 28 kg
• Dimensions: W 600 x D 520 x H 390
• Temperature range: max. +280 °C
• Connection: 230 V - 50 Hz - 2.5 kW
• NO on-site service

Service

No on-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: Tecnodom S.p.A. - Via Isonzo, n. 3-5 - 35010 - Vigodarzere (Padova) - ITALY / ITALY - Tel.: +39 049 8874215 - info@tecnodomspa.com (general one) - www.tecnodomspa.com

EU responsible person: Not required. Manufacturer is located in the EU.

• The device is intended exclusively for professional indoor use.
• The device must be placed on a stable, flat and heat-resistant surface.
• Ensure that the mains voltage matches the information on the type plate.
• The rear wall on which the apparatus is installed shall be made of non-combustible material and a distance of at least 10 cm from walls or obstacles shall be maintained to ensure adequate ventilation.
• Before first use, protective films must be removed and the device cleaned with a soft cloth and mild detergent.
• During operation, hot vapours can leak out – fire risk! Use suitable protective clothing and gloves.
• The device must not be placed near flammable materials or in environments with high humidity.
• The operation must not be carried out with wet hands to avoid electric shock.
• Before cleaning or maintenance work, the device must be switched off and separated from the power grid.
• No abrasive detergents, metal sponges or high pressure cleaners may be used to prevent damage to electrical parts.
• The mains cable and the connectors must be checked regularly for damage. Damaged cables may only be replaced by specialists.
• In the event of visible damage or malfunctions, the operation must be stopped immediately and qualified personnel must be notified.
• Repairs and technical interventions may only be carried out by authorised personnel.
• The ventilation openings of the device shall not be blocked or covered.
• When using the device, hot surfaces, such as glass doors, sheets and heating coils, can cause combustion – only when the device is cooled down.
• Ensure that no other electrical cables come into contact with the hot surfaces.
• Caution should be exercised when removing the door or other heavy parts, as they may be heavy.
• In the event of a defect, such as a faulty sensor or fan, the device shall not be operated any further.