Saro saladette, 3 doors, with glass attachment, model GN 3100 TNS

Product details

The Saro saladette GN 3100 TNS is suitable for professional preparation and refrigerated provision of ingredients in gastronomy, snack, pizzeria, bistro, catering and other commercial kitchen areas. Through the combination of cooled base, polyethylene-cutting board, glass attachment and additional work surface, it supports structured workflows in food preparation.

Housing and interior are made of stainless steel, the attachment is made of glass. The three self-closing doors facilitate daily use in ongoing kitchen operation. The cutting board made of polyethylene offers a practical preparation surface, complemented by a work surface arranged on the right.

The upper occupancy option is for 3 x 1/1 GN containers and 6 x 1/9 GN containers. Delivery is without GN containers. In the interior there are three height-adjustable grates with matching support rail sets.

Copeland's digital temperature control allows reliable control in the temperature range from +2 to +8 °C. Recooling and automatic defrosting support a uniform cooling operation. The pull-out compressor facilitates cleaning, while the four adjustable feet allow adjustment to the location.

With a capacity of 456 litres, the salad offers sufficient refrigerated storage space for ingredients and supplies in professional kitchens.

Product advantages

• 3 doors, self-closing
• Polyethylene-cutting board, depth 118 mm
• Desktop on the right: B 510 x D 580 mm
• Rounded glass attachment, left side
• Delivery without GN container
• Occupancy option above: 3x 1/1 GN + 6x 1/9 GN container

Technical data

• Material: (housing and interior) stainless steel; (top) glass
• 3 doors, self-closing
• Polyethylene-cutting board, depth 118 mm
• Desktop on the right: B 510 x D 580 mm
• Rounded glass attachment, left side
• Delivery without GN container
• Occupancy option above: 3x 1/1 GN + 6x 1/9 GN container
• 3 height-adjustable gratings and 3 support rail sets
• Pull-out compressor for easy cleaning
• Digital temperature control (Copeland)
• Circular air cooling
• Automatic defrosting
• Temperature range: +2 / +8 °C
• Connection: 230 V - 50 Hz - 0.350 kW
• Rusts: 3x W 328 x D 530 mm
• Capacity (gross/net): 456 / 291.5 litres
• Internal dimensions: W 1230 x D 580 x H 560 mm
• External dimensions: B 1795 x D 700 x H 890-950/1365 mm
• 4 adjustable feet
• Weight (net/gross): 134 / 211 kg
• Refrigerant: R600a
• On-site service

Service

On-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: Manufacturer: Saro Gastro-Products GmbH - Sandbahn 6 - 46446 Emmerich am Rhein - GERMANY / GERMANY - info@saro.de - www.saro.de

EU responsible person: Not required. Manufacturer is located in the EU.

• Place the device exclusively on a stable, horizontal surface.
• Ensure that the mains voltage matches the information on the type plate.
• The device shall not be operated near combustible materials or heat sources.
• Children and unauthorised persons must not use the device or use it improperly.
• Ventilation slots must not be blocked or concealed to avoid overheating.
• In the event of visible damage or malfunction, immediately adjust the operation and have the device checked.
• Do cleaning only if the device is switched off and separated from the network.
• Only use original spare parts and accessories that are approved for this device.
• Do not put hot food or open containers with liquids in the device to avoid condensation and icing problems.
• Cold-middle is flammable.
• If the cooling circuit is damaged, turn off the device immediately, disconnect from the power supply and ventilate the room. Avoid open fire or sparking.
• Do not use mechanical devices or tools to speed up the defrosting process. This could damage the cooling circuit.
• Repairs and maintenance work may only be carried out by qualified personnel.