Saro saladette, 2 doors, with glass attachment, model ES 900 G

Product details

The Saro Saladettes of the ES G series are suitable for the cooled preparation and clear provision of ingredients in gastronomy, snack, pizzeria, salad bar and catering. The cooled base, the GN attachment and the cutting surface form a compact work station.

Housing and interior are made of stainless steel. A cutting board made of polyethylene offers a directly usable preparation surface. The glass attachment has two storage surfaces and protects the ingredient area, while the products remain clearly visible and at hand.

Depending on the model, the upper area can be equipped with different GN container combinations. The required GN containers are not included in the scope of delivery. Self-locking doors as well as height-adjustable gratings and support rails enable structured use of the cooled interior.

The digital temperature control allows a setting of +2 to +8 °C. The static cooling is supported by a recirculating air fan, while automatic defrosting facilitates regular operation. The series is available with two or three doors and different working widths.

Product advantages

• 2 doors, self-closing
• Polyethylene-cutting board
• Glass attachment with 2 storage areas
• Delivery without GN container
• Capacity above: 10x 1/4 GN o. 2x 1/1 GN and 3x 1/6 GN container
• 2 height-adjustable grates and 2 support rail sets

Technical data

• Material: (housing and interior) stainless steel; (top) glass
• 2 doors, self-closing
• Polyethylene-cutting board
• Glass attachment with 2 storage areas
• Delivery without GN container
• Capacity above: 10x 1/4 GN o. 2x 1/1 GN and 3x 1/6 GN container
• 2 height-adjustable grates and 2 support rail sets
• Digital temperature control (Copeland)
• Evaporator foamed on 3 sides
• Static cooling with air ventilator
• Automatic defrosting
• Suitable for ambient temperatures from approx. 16 to 38 °C
• Temperature range: +2 / +8 °C
• Connection: 230 V - 50 Hz - 0.175 kW
• Rusts: 2x W 323 x D 560 mm
• Capacity (gross/net): 240/ 198 litres
• External dimensions: W 903 x D 700 x H 856/1289 mm
• Weight (net/gross): 95 / 92 kg
• Refrigerant: R600a
• Energy consumption: approx. 2.2 kWh/24h (all container covers closed)
• On-site service

Service

On-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: Manufacturer: Saro Gastro-Products GmbH - Sandbahn 6 - 46446 Emmerich am Rhein - GERMANY / GERMANY - info@saro.de - www.saro.de

EU responsible person: Not required. Manufacturer is located in the EU.

• Place the device exclusively on a stable, horizontal surface.
• Ensure that the mains voltage matches the information on the type plate.
• The device shall not be operated near combustible materials or heat sources.
• Children and unauthorised persons must not use the device or use it improperly.
• Ventilation slots must not be blocked or concealed to avoid overheating.
• In the event of visible damage or malfunction, immediately adjust the operation and have the device checked.
• Do cleaning only if the device is switched off and separated from the network.
• Only use original spare parts and accessories that are approved for this device.
• Do not put hot food or open containers with liquids in the device to avoid condensation and icing problems.
• Cold-middle is flammable.
• If the cooling circuit is damaged, turn off the device immediately, disconnect from the power supply and ventilate the room. Avoid open fire or sparking.
• Do not use mechanical devices or tools to speed up the defrosting process. This could damage the cooling circuit.
• Repairs and maintenance work may only be carried out by qualified personnel.