Saro Knife Steralizer Model KS 20

Product details

The Saro knife sterilizer KS 20 is suitable for hygienic storage and treatment of up to 20 knives in catering, large kitchen, butcher's shop and food processing.

The housing is made of stainless steel and is equipped with a UV-C lamp. The pre-programmed sterilization cycle runs over a period of two hours.

The closed design allows an orderly reception of the pinch and supports hygienic work processes in areas with regular knife use.

Product advantages

• Number of lamps: 1 x UV-C lamp
• For up to : 20 pinche
• Preprogrammed sterilization cycle of 2 hours

Technical data

• Material: stainless steel
• Number of lamps: 1 x UV-C lamp
• For up to : 20 pinche
• Preprogrammed sterilization cycle of 2 hours
• Weight (net/gross): 7,5 / 7,5 kg
• Dimensions: W 496 x D 607 x H 145 mm
• Connection: 230 V - 50 Hz - 0.15 kW
• NO on-site service

Service

No on-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

• The knife sterilizer is designed exclusively for indoor use and must be positioned in a vertical position, at least 1,30 metres above the ground.
• The device must be connected to an earthed socket. Make sure that the power supply is compatible.
• The device shall not be used in places where flammable vapours, explosive dusts or moisture are present.
• Children under the age of 8 and persons with reduced abilities may use the device only under supervision.
• The safety sensor automatically interrupts the UVC lamp when the door is opened. Do not try to manipulate this mechanism to operate the lamp when the door is open.
• The UVC lamp emits radiation that is harmful to the eyes. Never use UVC lamps outside the housing.
• Replace the UVC lamp at least once a year to ensure optimum sterilization performance.
• Before any maintenance or cleaning, the device must be separated from the power grid.
• The internal cleaning should only be done with a slightly moistened cloth. A penetration of water into the device can cause damage and invalidate the warranty.
• Dispose of packaging materials safely as they may pose a risk of suffocation.
• In the event of visible damage or malfunctions, contact the dealer or qualified specialist.
• Avoid the operation of the device in direct sunlight or in dusty, unsuitable environments.
• The maximum capacity is 20 pinches, which must be cleaned before insertion into the device.