Saro Refrigerated cabinet 115 liters, model LISETTE 120

Product details

The Saro cooling cabinets of the LISETTE series are designed for the chilled presentation of food, snacks, desserts, cakes, sandwiches or drinks in gastronomy, café, bakery, buffet area and sales environment. They are suitable for areas where products are to be made visible and chilled.

The case is made of stainless steel. The display cases are double glazed on four sides and have a two-part sliding door at the back. Two height-adjustable gratings allow a flexible presentation on several levels.

The separately switchable LED lighting supports a clear view of the products on display. Digital temperature control, recirculation air cooling and automatic defrosting are tailored to regular commercial use. The temperature range is +2 to +10 °C.

The series is available in different sizes and capacity. This allows the refrigerator to be selected according to the available footprint and the desired presentation volume.

Product advantages

• 4-seitig doppelverglast
• 2-part sliding door at the back
• 2 height-adjustable rusts
• LED lighting, separately switchable
• Digital temperature control (Copeland)
• Automatic defrosting

Technical data

• Material: (case) stainless steel
• 4-seitig doppelverglast
• 2-part sliding door at the back
• 2 height-adjustable rusts
• LED lighting, separately switchable
• Digital temperature control (Copeland)
• Automatic defrosting
• Circular air cooling
• Temperature range: +2 / +10 °C
• Connection: 230 V - 50 Hz - 0.160 kW
• Top rust: B 642 x D 372 mm / bottom rust: B 642 x D 408 mm
• Capacity (gross/net): 115 / 78 litres
• Dimensions: W 695 x D 580 x H 670 mm
• Weight (net/gross): 60 / 75 kg
• Refrigerant: R600a
• Energy efficiency class: C (Spectrum A to G)
• NO on-site service

Service

No on-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: Manufacturer: Saro Gastro-Products GmbH - Sandbahn 6 - 46446 Emmerich am Rhein - GERMANY / GERMANY - info@saro.de - www.saro.de

EU responsible person: Not required. Manufacturer is located in the EU.

• Place the device exclusively on a stable, horizontal and non-slip surface.
• Ensure that the mains voltage matches the information on the type plate.
• Before first use, all packaging materials and protective films must be removed completely.
• After transport, leave the device upright for at least 12 hours before it is switched on to avoid damage to the refrigerant circuit.
• Ensure that the vents are not blocked to ensure optimum air circulation and cooling.
• The device must not be placed near heat sources or direct sunlight.
• Bottles of high alcohol content must be tightly closed and stored upright in the appliance.
• Electrical devices or heating sources shall not be used in the device.
• Never clean with water jet or high pressure cleaner to avoid electric shock and short circuit risk.
• Damaged cables or plugs may not be used. Replacements may only be made by qualified personnel.
• Before any cleaning, maintenance or repair, turn off the device and disconnect it from the power grid.
• Clean the door seal only with water and make sure it remains intact to avoid loss of energy.
• The refrigerant is combustible; if the cooling circuit is damaged, air the room well and avoid open flames.
• Children must not use the device unattended or play nearby.
• The device is intended exclusively for the storage of food; any other use can cause damage and affect the guarantee.
• Regular cleaning of the capacitor by qualified personnel is recommended to extend the life of the device.
• Be careful when handling the display case (breakable glass). No heavy objects against lean or beat.
• In the event of visible damage or malfunctions, immediately adjust the operation and contact qualified personnel.