Saro Cooling attachment with lid - 1/3 GN, model VRX 1500 S/S

Product details

The Saro coolers with lids of the VRX-S/S series are intended for professional use in pizzeria, gastronomy, snack, preparation kitchen and buffet area. They are suitable for the refrigerated supply of ingredients in GN containers and can be used depending on the model as a supplement to pizza tables.

Housing and folding lid are made of stainless steel. The version with lid supports a protected storage of the ingredients during operation. Delivery is without GN container.

The cooling adapters are designed for 1/3-GN containers up to 150 mm depth and are available in different lengths and container capacities depending on the model. This allows the appropriate design to be adapted to the respective workplace and the required amount of ingredients.

The digital temperature control, static cooling and the foamed evaporator are tailored to commercial use. The easy-to-clean filter can be reached via a service door. Four height adjustable feet support secure positioning on the work surface.

Product advantages

• Ideal in combination with our pizza tables
• For 6x 1/3 or 5x 1/3 + 1/2 GN containers up to 150 mm depth
• Delivery without GN container
• Easy to clean filter through service door
• Evaporator foamed
• Digital temperature control (Copeland)

Technical data

• Material: (case, folding lid) stainless steel
• Ideal in combination with our pizza tables
• For 6x 1/3 or 5x 1/3 + 1/2 GN containers up to 150 mm depth
• Delivery without GN container
• Easy to clean filter through service door
• Evaporator foamed
• Digital temperature control (Copeland)
• Static cooling
• Temperature range: +2 / +8 °C
• Connection: 230 V - 50 Hz - 0.150 kW
• External dimensions: W 1500 x D 395 x H 280 mm
• 4 height adjustable feet
• Weight (net/gross): 29 / 39 kg
• Refrigerant: R600a
• NO on-site service

Service

No on-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: Manufacturer: Saro Gastro-Products GmbH - Sandbahn 6 - 46446 Emmerich am Rhein - GERMANY / GERMANY - info@saro.de - www.saro.de

EU responsible person: Not required. Manufacturer is located in the EU.

• Place the device exclusively on a stable, horizontal surface.
• Ensure that the mains voltage matches the information on the type plate.
• Do not operate near heat sources, direct sunlight or in damp rooms.
• After transporting the device, leave at least 5 hours before it is switched on to avoid damage to the cooling circuit.
• Ventilation slots and the area around the device must remain free to ensure adequate air circulation and avoid overheating.
• The refrigerant is combustible; avoid damage to the cooling circuit. In case of a leak, air the room well and avoid open fire.
• Never clean or dip in water with a jet of water; danger of short circuit and electric shock.
• Children and unauthorised persons must not use the device or use it improperly.
• Damaged cables or connectors may not be used; replacement only by qualified personnel.
• Before cleaning, maintenance or prolonged non-use, turn off the device and disconnect it from the power grid.
• The device is intended exclusively for the cooling and storage of food; abusive use can cause damage and affect the guarantee.
• In the event of visible damage or malfunction immediately stop operation and contact the dealer.
• Repairs and maintenance work may only be carried out by qualified personnel.