NordCap Type 5416 stainless steel portioning sink, fitted, with portioning shower and ball valve

Product details

The NordCap type 5416 portioning sink made of stainless steel combines a portioning shower with adjustable water flow and is installed in a cut-out of 253 x 94 mm.

The portioning sink type 5416 is part of the accessories of NordCap dining equipment and is intended for permanent installation. With external dimensions of 270 x 110 x 115 mm (W x D x H), it requires a recess of 253 x 94 mm and can therefore be integrated in a space-saving manner. Alternatively, it can be mounted via an optionally available stainless steel holder on ice cabinets of the MILLENNIUM 2.0 and MILLENNIUM GELATO series or ISETTA, FIJI, ISABELLA, BERMUDA and ELEGANCE series.

The sink is equipped with a portioning shower and a adjustable water flow, so that the amount of water can be adjusted to the requirements. In the basin there is a standpipe with tap edge. A ball valve is standard to the delivery, on its 3/8 inch internal thread the water inlet is connected. The operation is done without electronics.

The portioning sink is made of stainless steel. It contains no electronic components and does not require a power connection. With a weight of 2 kg it can be easily handled during assembly. The portioning rinse is manufactured in Germany.

The water inflow is via the 3/8 inch internal thread on the standard ball valve, the water is drained via a 3/4 inch hose or a dishwasher drain hose. A check valve is required for the water inflow according to DVGW. Matching brackets made of stainless steel are optionally available under item numbers 48812703 and 48812702.

• 1 x portioning sink type 5416, stainless steel
• 1 x ball valve

• Manufacturer item number: 4881275416
• Installation type: fitable
• External dimensions (W x D x H): 270 x 110 x 115 mm
• Mounted cutout (W x D): 253 x 94 mm
• Equipment: Standpipe with tap edge, portioning shower, adjustable water flow
• Water supply: 3/8 inch internal thread on the standard ball valve
• Water flow: over 3/4 inch hose or dishwasher drain hose
• Material: stainless steel
• Electrical connection: none (excluding electronic components)
• Weight: 2 kg net
• Country of origin: Germany

• Portioning shower with adjustable water flow
• Standpipe with tap-off edge
• Ball valve as standard
• Fitted in a cut-out of 253 x 94 mm
• Flow over 3/4 inch hose or dishwasher drain hose
• stainless steel, made in Germany

Notes on establishment and operation

In accordance with DVGW, a check valve is required for the water supply.

Energy labelling

This product without electronic components is not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.