NordCap Type 54 stainless steel portioning sink, fitted, with standpipe and adjustable water flow

Product details

The NordCap Type 54 portioning sink made of stainless steel is installed in a cut-out of 253 x 94 mm and offers a stand-up tube with tap-off edge and a adjustable water flow.

The type 54 portioning sink is part of the accessories of the NordCap food processing technology and is intended for permanent installation. With external dimensions of 270 x 110 x 115 mm (W x D x H), it only needs a recess of 253 x 94 mm and thus fits into the working area in a space-saving manner. Alternatively, it can be mounted via an optionally available stainless steel holder on ice cabinets of the MILLENNIUM 2.0 and MILLENNIUM GELATO or ISETTA, FJHA, ISABELLA, BERMUDA and ELEGANCE series.

The water flow is adjustable so that the amount of water can be adjusted to the requirements during operation. The sink is deliberately simple to build and can be operated without any controls or electronics, which makes it easy to keep it in daily use.

The portioning sink is made of stainless steel. It contains no electronic components and therefore does not require a power connection. With a weight of only 1 kg, it is easy to handle and can be easily used during assembly. The portioning sink is manufactured in Germany.

The water inflow is via a copper pipe with 8 mm diameter and crushing screw. The water is drained via a 3/4 inch hose or a dishwasher drain hose. A check valve is required for the water inflow according to DVGW. Matching brackets made of stainless steel are optionally available under item numbers 48812703 and 48812702.

• 1 x portioning sink type 54, stainless steel

• Manufacturer item number: 48812754
• Installation type: fitable
• External dimensions (W x D x H): 270 x 110 x 115 mm
• Mounted cutout (W x D): 253 x 94 mm
• Equipment: Standpipe with tap-off edge, adjustable water flow
• Water inlet: CU pipe, Ø 8 mm, with crushing screw
• Water flow: over 3/4 inch hose or dishwasher drain hose
• Material: stainless steel
• Electrical connection: none (excluding electronic components)
• Weight: 1 kg net
• Country of origin: Germany

• Fitted in a cut-out of 253 x 94 mm
• Standpipe with tap-off edge
• Controllable flow of water
• Water supply via CU pipe Ø 8 mm with crushing screw
• Flow over 3/4 inch hose or dishwasher drain hose
• stainless steel, made in Germany

Notes on establishment and operation

In accordance with DVGW, a check valve is required for the water supply.

Energy labelling

This product without electronic components is not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.