NordCap BASIC E-112-45 PRO built-in heat cabinet for GN 3/1, 65 to 85 °C, infrared support heat and humidity, 230 V

Product details

The NordCap BASIC E-112-45 PRO built-in heat cabinet for GN 3/1 is inserted into a structural panel and holds meals with heating plate, infrared support heat and adjustable humidity at 65 to 85 °C.

The BASIC E-112-45 PRO is a built-in heating cabinet of the BASIC Line in rectangular design, designed for GN 3/1. As a built-in unit it is designed for insertion into a building-side panel, the installation cut-out measures 1115 x 646 mm. The outside dimensions are 1115 x 918 x 757 mm (W x D x H), the footprint is indicated with 0.52 m2.

The front panel can be moved in and allows the switch between the operating and self-service cabinet, and is mirrored on the customer's side. The glass lid can be opened upwards, the control-side rotating doors are removable. A heat-resistant LED lighting with 2700 K (warm white) illuminates the footprint.

The heat is provided by a high-foldable heating plate and an infrared support heat, the temperature range is between 65 and 85 °C. The display case is operated via an electronic control system with pictograms for infrared support heat and humidity. The moisture supply is adjustable, three types of climate are available, an acoustic and optical display is also available. On the operating side there is a water refill tank, which is part of the scope of delivery as standard accessories.

The exterior panelling is made of stainless steel CNS 1.4301 with ground face sides, the tub paneling from CHR, inside CNS 1.4301 is also used. The electrical connection is at 230 V, 1-phase, 50 Hz with a connection value of 2.96 kW. The display case weighs 135 kg net and is manufactured in Austria. An instruction manual, an electrical circuit diagram, a dimensional drawing and a declaration of conformity are available at NordCap.

• 1 x BASIC E-112-45 PRO built-in heating cabinet
• 1 x water refill container

• Manufacturer item number: 484521312
• Suitable: for GN 3/1
• Design: BASIC Line, square
• Installation type: Installation device for inserting in building panel
• External dimensions (W x D x H): 1115 x 918 x 757 mm
• Fitted cutout: 1115 x 646 mm
• Surface area: 0,52 m2
• Temperature range: 65 to 85 °C
• Heating: high folding heating plate, infrared support heat
• Control: electronic, pictogram control for infrared support heat and humidity, acoustic / optical display
• Moisture: adjustable moisture supply, 3 types of climate, water refill container on the operating side
• Glazing: front panel retractable, mirrored on the customer's side; glass lid folds upwards
• Doors: revolving doors on the operating side, removable
• Lighting: LED, heat resistant, 2700 K (warm white)
• Connection: 2.96 kW, 230 V, 1-phase, 50 Hz
• Outside facing: CNS 1.4301, face-ground, tub cladding CHR
• Internal facing: CNS 1.4301
• Weight: 135 kg net (205 kg gross)
• Country of origin: Austria

• Change between operating and self-service cabinets through sliding windscreen
• Windshield mirrored by customer
• Infrared support heat and adjustable moisture supply with 3 types of climate
• Foldable heating plate
• Glass top foldable, control-side revolving doors removable
• Heat-resistant LED lighting, 2700 K warm white
• Acoustic and optical display
• Installation device for insertion in building panel

Notes on establishment and operation

Installation device for inserting into a building side panel, installation cut-out 1115 x 646 mm. The operating side water refill tank serves the moisture supply.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: AKE Ausseer Kühle- und Edelstahltechnik GmbH, Pichl 66, 8984 Bad Mitterndorf, Austria
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.