NordCap Heating plate HP-GN 2/1 for 2 x GN 1/1, black glass footprint, 55 to 75 °C, plug-in 230 V

Product details

The NordCap HP-GN 2/1 heating plate is designed for 2 x GN 1/1 and holds the black glass display surface over an underlying heating plate to 55 to 75 °C.

The HP-GN 2/1 is a plug-in heating plate for 2 x GN 1/1, which leads NordCap in the group of contact heating plates. With outer dimensions of 800 x 695 x 120 mm (W x D x H) it builds flat. As a set-up option it has a surrounding hanging edge. The set-out surface is made of black glass and serves as a storage and storage area.

The actual heating plate is below the base area. The temperature range ranges from 55 to 75 °C. The temperature is controlled by an electronic control system with digital display, so that the set values can be read at any time. An insulation made of PUR hard foam is installed in the device.

The exterior and interior cladding are made of stainless steel CNS 1.4301, the viewing sides are each ground. The heating plate is manufactured in Austria, the gross weight is indicated with 34 kg. For the planning NordCap provides a product data sheet, a dimensional drawing, a contract text and AutoCAD-2D data.

The heating plate is plug-in and is connected to 230 V, 1-phase, 50 Hz, the connection value is 0.50 kW. Commercial heat devices are not subject to EPREL marking requirements. When used in combination with a cough protection, the WB HS E-40 series with specific dimensions is required. Optionally available is the cough protection with heat bridge WB HS E-21-40 HP (NordCap Art.-No. 484535016) with 400 mm height and straight cover glass, which can only be combined with HP GN series heating plates.

• 1 x heating plate HP-GN 2/1

• Manufacturer item number: 484530081
• Suitable: for GN 1/1 (2 x GN 1/1)
• Construction option: surrounding edge
• Exhibit surface: black glass (shelter and storage area)
• Heating: heating plate under the floor area
• Temperature range: 55 to 75 °C
• Control: electronic, digital display
• External dimensions (W x D x H): 800 x 695 x 120 mm
• Connection: ready to plug, 0,50 kW, 230 V, 1-phase, 50 Hz
• Insulation: PUR hard foam
• exterior facing: CNS 1.4301, face-ground
• Internal facing: CNS 1.4301, face-ground
• Gross weight: 34 kg
• Country of origin: Austria

• Black glass exhibition surface
• Heating plate under the footprint, 55 to 75 °C
• Electronic control with digital display
• Circular edge
• Plug ready for 230 V
• stainless steel CNS 1.4301, face-ground
• Suitable cough protection WB HS E-21-40 HP optionally available

Notes on establishment and operation

When used in combination with a cough protection, the WB HS E-40 series with specific dimensions is required. The cough protection WB HS E-2-1-40 HP is not included.

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: AKE Ausseer Kühle- und Edelstahltechnik GmbH, Pichl 66, 8984 Bad Mitterndorf, Austria
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.