NordCap Cough protection with heat bridge WB HS 3-1-45 D, 450 mm high, ESG disc curved on both sides, LED lighting

Product details

The NordCap cough protection WB HS 3-1-45 D with heat bridge is mounted via heat devices such as Bain-Maries or heat plates and spans them with a curved ESG disc and LED lighting on both sides.

The WB HS 3-1-45 D is a cough protection with heat bridge for mounting via heat devices, for example via Bain-Maries or heat plates. With external dimensions of 1160 x 668 x 450 mm (W x D x H) it forms a solid glass structure, which is screwed into the construction worktop. At NordCap, it belongs to the product group of cough protectors, uncooled glass bodies and neutral SB-vistrins.

The cover consists of an ESG disc, which is bent on both sides. The structure of round tube supports with a diameter of 38 mm is carried. An LED lighting is integrated. The electrical wiring runs in the round tube and is loosely led out, so that it is led above the worktop in the carrier.

Outside and interior cladding are made of stainless steel CNS 1.4301. The net weight is 42 kg, the gross weight 52 kg, the cough protection is produced in Austria. For the article NordCap provides an operating instruction for the series of display cases with heat, a declaration of conformity, a product data sheet, a dimensional drawing, a contract text as well as CAD and BIM data.

For the heat bridge, an electrical connection value of 1.29 kW at 230 V, 1-phase, 50 Hz is indicated. Commercial heat devices are not subject to any EPREL marking obligation, this also applies to this cough protection with heat bridge. The construction is secured via counter thread M20 for screwing into the construction side worktop.

• 1 x cough protection with heat bridge WB HS 3-1-45 D

• Manufacturer item number: 484535022
• Suitable: for mounting on heat equipment such as Bain-Maries or heat plates
• External dimensions (W x D x H): 1160 x 668 x 450 mm
• Disc: ESG, curved on both sides
• Carrier: round tube, Ø 38 mm
• Lighting: LED
• Electrical wiring: loosely drawn out in the round tube downwards
• Mounting: counter thread M20 for screwing in on-site worktop
• Connection: 1.29 kW, 230 V, 1-phase, 50 Hz
• Outside facing: CNS 1.4301
• Internal facing: CNS 1.4301
• Weight: 42 kg net (52 kg gross)
• Country of origin: Austria

• Heat bridge for mounting via Bain-Maries or heat plates
• ESG disc, curved on both sides
• Integrated LED lighting
• Wiring in the round tube guided
• Fixed fitting with counter thread M20
• Round tube support Ø 38 mm
• stainless steel CNS 1.4301

Notes on establishment and operation

The assembly is carried out by screwing with counter thread M20 into a worktop on the side of the building. The electrical wiring is loosely carried out in the round tube downwards.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: AKE Ausseer Kühle- und Edelstahltechnik GmbH, Pichl 66, 8984 Bad Mitterndorf, Austria
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.