NordCap Contact cooling plate KP-GN 3/1-Z for 3 x GN 1/1, centrally cooled, 4 to 12 °C, height 59 mm

Product details

The NordCap contact cooling plate KP-GN 3/1-Z is a centrally cooled installation unit for GN 1/1 for temporary cooling and presentation of food at 4 to 12 °C.

The KP-GN 3/1-Z is designed for use in buffets, catering, retail counters or self-service areas where food is temporarily cooled and presented. It is designed as a built-in unit for 3 x GN 1/1. With external dimensions of 970 x 525 x 59 mm (W x D x H), the plate is very flat, the recessed cut-out is 985 x 540 mm (W x D), the footprint 0.54 m2. Important for planning: The contact cooling plate is only suitable for short-term cooling of the products, long-term or permanent cooling is not possible.

The temperature is set by mechanical control, the temperature range is 4 to 12 °C, relative to 25 °C ambient temperature and 60 % relative humidity. The device is classified as climate class 3. For the installation in the recess the plate has four fixing flaps, a light outer bulging beach serves to capture the condensation water.

The exterior and interior cladding are made of stainless steel CNS 1.4301, the viewing sides are each ground. PUR hard foam with a thickness of up to 50 mm ensures insulation. With a net weight of 43 kg, the contact cooling plate can be handled and used well. It is manufactured in Austria.

The KP-GN 3/1-Z is centrally cooled and is supplied without expansion valve. Evaporators and cooling lines are designed in copper with a diameter of 8 mm, the cooling capacity is 330 W at -10 °C evaporation temperature. Electrically, the unit is supplied with 230 V, 50 Hz and a connection value of 0.01 kW. Optionally available as special accessories are an expansion valve mounted on the evaporator with extruded cooling lines as well as an electronic thermostat in stainless steel housing for centrally cooled models.

• 1 x contact cooling plate KP-GN 3/1-Z

• Manufacturer's item number: 484255476
• Mounting method: Mounting device, 4 x mounting bracket
• Suitable: for temporary cooling and presentation of food in buffets, catering, sales counters or self-service areas
• Format: for GN 1/1
• External dimensions (W x D x H): 970 x 525 x 59 mm
• Mounted cutout (W x D): 985 x 540 mm
• Surface area: 0,54 m2
• Temperature range: 4 to 12 °C (at 25 °C ambient temperature and 60 % relative humidity)
• Climate class: 3 (+25 °C ambient temperature, 60% relative humidity)
• Control: mechanical
• Connection type: Centrally cooled
• Refrigerant: without expansion valve
• Evaporator, cooling lines: CU, Ø 8 mm
• Cooling capacity: 330 W at -10 °C Evaporation temperature
• Connection: 0,01 kW, 230 V, 1-phase, 50 Hz
• Insulation: PUR hard foam, up to 50 mm
• exterior facing: CNS 1.4301, face-ground
• Internal facing: CNS 1.4301, face-ground
• Weight: 43 kg net
• Country of origin: Austria

• For buffets, catering, sales counters and self-service areas
• Flat height of 59 mm
• Centrally cooled, cooling lines CU Ø 8 mm
• Mechanical control
• Mounting device with 4 mounting flaps
• Outer Wulf Beach for the collection of condensation
• stainless steel CNS 1.4301 outside and inside, face ground

Notes on establishment and operation

Only suitable for short-term cooling of the products, a long-term or permanent cooling is not possible. The unit is centrally cooled and is supplied without expansion valve (cooling lines CU, Ø 8 mm).The installation cut-out is 985 x 540 mm (W x D).

Operating instructions

Download user manual (PDF)

Energy labelling

No EU energy label is stored for this device on the manufacturer's side.

Product safety (GPSR)

Manufacturer: AKE Ausseer Kühle- und Edelstahltechnik GmbH, Pichl 66, 8984 Bad Mitterndorf, Austria
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.