NordCap Contact cooling plate KP-EN 1 for 1 x EN 600 x 400 mm, plug-in, 4 to 12 °C, R-290

Product details

The NordCap contact cooling plate KP-EN 1 is a plug-in unit for EN 600 x 400 mm with machine compartment below, which cools products at 4 to 12 °C for a short time.

The KP-EN 1 is designed as an installation device for EN 600 x 400 mm and can take up 1 x EN 600 x 400 mm. With external dimensions of 430 x 630 x 399 mm (W x D x H) and a recess of 445 x 645 mm (W x D), a footprint of 0.24 m2 is achieved. The temperature range is 4 to 12 °C, relative to 25 °C ambient temperature and 60 % relative humidity, the device is assigned to climate class 3. Important for planning: The contact cooling plate is only suitable for short-term cooling of the products, a long-term or permanent cooling is not possible.

The temperature is controlled by electronic control. The machine compartment is located at the bottom of the device, the contact cooling plate is connected ready for plugging to 230 V. The plate has four mounting flaps for mounting in the recess.

The exterior and interior cladding are made of stainless steel CNS 1.4301, the viewing sides are each ground. PUR hard foam with a thickness of up to 50 mm ensures insulation. The light outer bulging beach of the plate is used to capture the condensation water.

The natural refrigerant R-290 (propane) is cooled at a filling quantity of 55 g, the greenhouse potential is indicated with GWP100 (AR5) 3. The cooling capacity is 145 W at -10 °C evaporation temperature, the connection value is 0.15 kW at 230 V and 50 Hz. The energy consumption is indicated with 2.16 kWh in 24 hours. The net weight is 29 kg, the contact cooling plate is produced in Austria.

• 1 x contact cooling plate KP-EN 1

• Manufacturer item number: 484356550
• Mounting method: Mounting device, 4 x mounting bracket
• Suitable: for EN 600 x 400 mm, mounting (optional): 1 x EN 600 x 400 mm
• External dimensions (W x D x H): 430 x 630 x 399 mm
• Mounted cutout (W x D): 445 x 645 mm
• Surface area: 0,24 m2
• Temperature range: 4 to 12 °C (at 25 °C ambient temperature and 60 % relative humidity)
• Climate class: 3 (+25 °C ambient temperature, 60% relative humidity)
• Control: electronic
• Connection type: plug-ready, machine compartment below
• Refrigerant: R-290 (propane), filling quantity 55 g, GWP100 (AR5) 3
• Cooling capacity: 145 W at -10 °C Evaporation temperature
• Connection: plug-ready, 0.15 kW, 230 V, 1-phase, 50 Hz
• Energy consumption: 2.16 kWh/24 h
• Insulation: PUR hard foam, up to 50 mm
• exterior facing: CNS 1.4301, face-ground
• Internal facing: CNS 1.4301, face-ground
• Weight: 29 kg net
• Country of origin: Austria

• Plug ready, machine compartment below
• Electronic control
• Mounting device with 4 mounting flaps
• Outer Wulf Beach for the collection of condensation
• Natural refrigerant R-290
• stainless steel CNS 1.4301 outside and inside, face ground
• PUR hard foam insulation up to 50 mm

Notes on establishment and operation

Only suitable for short-term cooling of the products, a long-term or permanent cooling is not possible. The installation cut-out is 445 x 645 mm (W x D).

Operating instructions

Download user manual (PDF)

Energy labelling

No EU energy label is stored for this device on the manufacturer's side.

Product safety (GPSR)

Manufacturer: AKE Ausseer Kühle- und Edelstahltechnik GmbH, Pichl 66, 8984 Bad Mitterndorf, Austria
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.