NordCap Built-in cooling tray EBS 5-1-Z for GN 1/1-150, static cooling, 4 to 12 °C, centrally cooled

Product details

The centrally cooled NordCap built-in cooling tray EBS 5-1-Z for GN 1/1-150 works with static cooling at 4 to 12 °C and offers 171 liters of net content.

The EBS 5-1-Z is a built-in cooling tank for GN 1/1-150 gas standard containers and works with static cooling. With external dimensions of 1692 x 596 x 260 mm (W x D x H) it offers a net content of 171 litres. For the installation a cut-out of 1702 x 607 mm is provided, the base dimension is 1702 x 607 mm. The tub is used via a stable suspension edge and has a removable mounting frame.

The temperature range is 4 to 12 °C, given at 25 °C ambient temperature and 60 % relative humidity, the tub is classified as climate class 3. The evaporator is designed with lateral contact tube. For centrally cooled models, a mechanical or electronic thermostat in stainless steel housing is optionally available.

External and internal cladding are made of stainless steel CNS 1.4301, the viewing sides are ground. Corners and edges of the tub are rounded. The weight is 75 kg net, the cooling tank is manufactured in Austria.

The EBS 5-1-Z is centrally cooled and is intended for operation with a separate liquefaction set, an expansion valve is not included. The cooling capacity is indicated at 330 W at -10 °C evaporation temperature. Optionally available is an expansion valve mounted on the evaporator with extruded cooling lines, for this refrigerants and valve type must be specified. The dew water is drained via a flow HD with 30 mm diameter, on the construction side a dew water drain is required, alternatively a dew water bowl for emptying for approx. 12 l optional available.

• 1 x built-in cooling tray EBS 5-1-Z with removable mounting frame

• Manufacturer item number: 484253451
• Mounting type: Mounting device, stable mounting edge, mounting frame removable
• Suitable: for GN 1/1-150
• External dimensions (W x D x H): 1692 x 596 x 260 mm
• Mounted cutout (W x D): 1702 x 607 mm
• Underbody dimension (W x D): 1702 x 607 mm
• Net content: 171 l
• Temperature range: 4 to 12 °C (at 25 °C ambient temperature and 60 % relative humidity)
• Climate class: 3 (+25 °C ambient temperature, 60% relative humidity)
• Connection type: centrally cooled (separated liquefaction set)
• Type of cooling: static cooling, evaporator with lateral contact pipe
• Refrigerant: without expansion valve
• Cooling capacity: 330 W at -10 °C Evaporation temperature
• Dewwater drainage: HD Ø 30 mm, construction-side dewwater drainage required
• exterior facing: CNS 1.4301, face-ground
• Internal facing: CNS 1.4301
• Weight: 75 kg net
• Country of origin: Austria

• Static cooling via evaporator with lateral contact pipe
• Centrally cooled for operation with separate liquefaction set
• Stable suspension edge and removable mounting frame
• Rounded corners and edges
• stainless steel CNS 1.4301, face-ground
• Thermostat mechanically or electronically optional available

Notes on establishment and operation

On the construction side, a dew water drain is required (discharge HD Ø 30 mm), alternatively, a dew water dish is available as an option. The unit is centrally cooled and is operated with a separate liquefaction set, an expansion valve is not included.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial refrigerated storage cabinets operated with a separate liquefaction set shall not be subject to any EU energy label marking requirement under (EU) 2015/1094 (no EPREL registration).

Product safety (GPSR)

Manufacturer: AKE Ausseer Kühle- und Edelstahltechnik GmbH, Pichl 66, 8984 Bad Mitterndorf, Austria
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.