NordCap wall-mounted refrigerated display ANGEL 950-206 M2 1250 with night blind, centrally cooled, 3 to 5 °C

Product details

The NordCap wall-mounted refrigerated display ANGEL 950-206 M2 1250 cools and presents packaged sausages and dairy products in the module system – centrally cooled, with 3 to 5 °C, electronic night scooter and energy-saving EC fans.

The ANGEL 950-206 M2 1250 is a centrally cooled wall-mounted refrigerated display for cooling and presentation of packaged sausages and dairy products. It corresponds to the temperature classification M2 (for cooling e.g. Dairy products or sausage products) and has a temperature range of 3 to 5 °C, measured at 25 °C ambient temperature and 60 % relative humidity (climate class 3). With external dimensions of 1310 x 945 x 2120 mm (W x D x H) and a gross volume of 992 litres, it offers a footprint of 3.98 m2 and a product presentation area (TDA) of 2.19 m2. The shelf is built up as a modular system and can be channelled.

An electronic night scooter is standard equipment. In the interior there are 5 height and tilt adjustable shelves with a depth of 500 mm and a floor support with a depth of 690 mm. An interior LED light in the ceiling part with 4000 K (neutral white) can be switched separately, on the side two panoramic side parts close off the shelf. The depth is 945 mm, the front height 350 mm.

The exterior cladding is made of galvanized powder-coated steel sheet in the colour GDR (white), the interior cladding is also white. Four adjustable feet are included. The fans are designed as energy-saving EC fans, the defrosting is done automatically by compressor stop. Optionally available are, among other things, stainless steel bumpers in rectangular or round version for front and side parts as well as LED floor lighting in white or pink.

Cooling is done with circulating air, the expansion valve for the refrigerant R-449A is pre-installed, the filling volume is 160 g. The cooling capacity is 1110 W at -8 °C evaporation temperature, the cold lines on the evaporator have Ø 10/22. Electrically, the shelf is connected to 230 V (1-phase, 50 Hz) and the connection value is 0.05 kW with a protection of 0.29 A. The basic equipment is supplied without control: For operation, a separately available control system with a suitable pressure transducer and a solenoid valve on the construction side is necessary. In addition, a construction-side dew water drain is required.

• 1 x wall-mounted refrigerated display ANGEL 950-206 M2 1250
• 1 x floor covering
• 2 x panoramic side panel
• 5 x shelf, height / tilt adjustable
• 4 x feet, adjustable
• 1 x night blind, electronic

• Manufacturer item number: 45495020610
• Suitability: for cooling and presentation of packaged sausages and dairy products
• Construction option: modular system, can be channelled
• Connection type: Centrally cooled
• Type of cooling: recirculated air cooling
• External dimensions (W x D x H): 1310 x 945 x 2120 mm
• Body dimensions (W x D x H): 1250 x 945 x 2060 mm
• depth: 945 mm, front height: 350 mm
• Gross content: 992 l
• Surface area: 3,98 m2
• Product presentation area (TDA): 2,19 m2
• Storage and storage area: 5 x shelf, height / tilt adjustable, T 500 mm; 1 x floor support, T 690 mm
• Temperature range: 3 to 5 °C (at 25 °C ambient temperature and 60 % relative humidity)
• Temperature classification: M2 (for cooling e.g. dairy products or sausage products)
• Climate class: 3 (+25 °C ambient temperature, 60% relative humidity)
• Lighting: 1 x LED interior light in ceiling part, 4000 K (neutral white), separately switchable
• Control: Basic equipment without control (special accessories)
• Defrosting: automatic (compressor top), construction-side dew water drainage required
• Fan: EC fan, energy saving
• Refrigerant: expansion valve for R-449A pre-installed, filling volume 160 g
• Refrigeration: 1110 W at -8 °C Evaporation temperature
• Evaporators, cooling lines: Ø 10/22
• Connection: 0.05 kW, 230 V, 1-phase, 50 Hz
• Hedging: 0,29 A
• Outside facing: steel sheet, galvanized, powder coated, colour: GDR (white)
• Internal panel: white
• Country of origin: Italy

• Electronic night scooter as standard
• Module system, can be channelled
• Energy-saving EC fans
• Panorama side panels
• 5 height and tilt adjustable shelves plus floor support
• LED interior lighting 4000 K, separately switchable
• Automatic defrosting by compressor stop

Notes on establishment and operation

Centrally cooled unit: Operation requires connection to an external cooling system. The basic equipment is supplied without control – a separately available control system with a suitable pressure transducer and solenoid valve (on the side of the building) is necessary for operation. Supplied in a stable wood frame. NordCap recommends a night scooter kit (available on request) when sewering multiple devices.

Operating instructions

Download user manual (PDF)

Energy labelling

No EU energy label is stored for this device on the manufacturer's side.

Product safety (GPSR)

Manufacturer: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.