NordCap Front panel for series EVO 700, for socket installation, 400 x 100 mm

Product details

The NordCap front panel for the EVO 700 series measures 400 x 100 mm (W x H) and is part of the installation accessories for the installation on cement base.

The front panel is part of the installation accessories of the NordCap series EVO 700. In the NordCap range, it is assigned to the heading "Installation on cement base EVO 700" and is intended according to the manufacturer for the socket installation. It is therefore aimed at kitchen planning where equipment of the EVO 700 series is installed on a cement base.

The dimensions indicate NordCap with 400 x 100 mm (W x H), so the front panel is 400 mm wide and 100 mm high. When planning a base set-up, you can assign it to the respective device line based on this width. Further dimensions or information about the material are not stored for this article.

The front panel is a pure component without electronic components. No electricity, gas or water connection is required, controls are not available. For this reason, the article is not subject to EPREL marking requirements, an energy label is not provided for this purpose.

The country of origin is indicated in Italy. NordCap ZANUSSI PROFESSIONAL is a manufacturer in Pordenone, the owner of the brand is Aktiebolaget Electrolux. A 400 mm wide front panel is delivered. In the NordCap range it is listed under the manufacturer's product number 406206147, which makes it easier for you to clearly assign it to a reorder.

• 1 x front panel, 400 x 100 mm (W x H)

• Manufacturer item number: 406206147
• Series: EVO 700
• Suitable: for base installation (installation on cement base)
• Dimensions (W x H): 400 x 100 mm
• Electronic components: none
• Country of origin: Italy

• Installation accessories for the EVO 700 series
• For the base installation on cement base
• Width 400 mm, height 100 mm
• Without electronic components, no connection required

Notes on establishment and operation

The front panel is intended for the socket installation of EVO 700 series devices.

Energy labelling

This product without electronic components is not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: ZANUSSI PROFESSIONAL, Viale Treviso 15, 33170 Pordenone, Italy (trade mark holder: stock bullage Electrolux, 105 45 Stockholm, Sweden)
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.