NordCap Storage tank R 300 (406 kg) for ice makers, incl. cover kit CBT48FMCD, stainless steel 1.4509

Product details

The NordCap storage tank R 300 (406 kg) supplies ice on the SPN and SVD series ice-making lines in an insulated stainless steel housing with vertically detectable drawer lid.

The NordCap storage tank R 300 (406 kg) is designed for combination with the SPN and SVD series ice making lines and is used to store the produced ice in a separate, insulated container. It is adapted to the above-mentioned ice making series with external dimensions of 1237 x 868 x 1274 mm (W x D x H). The scope of delivery includes the matching cover kit CBT48FMCD, so that the container can be combined with the respective ice maker.

For the removal of the ice, the container has an insulated drawer lid with a surrounding frame seal and hinges made of stainless steel. The lid can be determined vertically and thus remains open during the ice removal. Inside, a guide plate made of stainless steel is installed, for the drain a flexible drain pipe ensures. When the flap is opened, the depth is 1154 mm, which should be taken into account when planning the location.

The outer lining is made of stainless steel 1.4509. The inner container is made of polyethylene with AGION® antibacteria coating and is deep drawn in a pcs, which does not create any joints in the interior and allows the surfaces to be cleaned well. The insulated removal lid closes the inner container upwards.

The storage container works without electronic components and therefore does not require its own electrical connection. The net weight is 73 kg, the gross weight 97 kg, the container is manufactured in Italy. The installation shall include a wall spacing of at least 152 mm on the construction side, which shall apply to the entire combination of containers and ice makers at their later location.

• 1 x storage tank R 300 (406 kg)
• 1 x cover kit CBT48FMCD

• Manufacturer item number: 413300300024
• Suitable: for combination with the SPN and SVD series ice making lines
• External dimensions (W x D x H): 1237 x 868 x 1274 mm
• Depth with open flap: 1154 mm
• Cap: insulated, frame seal, stainless steel hinges, vertically detectable
• Equipment: stainless steel sheet, flexible drain pipe
• Outside facing: stainless steel 1.4509
• Inner container: Polyethylene with AGION® antibacteria coating, deep drawn in a pcs
• Electrics: no electronic components
• Weight: 73 kg net (97 kg gross)
• Country of origin: Italy

• Can be combined with the SPN and SVD series ice-making lines
• Insulated drawer cover with frame seal, vertically detectable
• Stainless steel hinges and stainless steel sheet
• Inner container in a pcs deep drawn with AGION® Antibacteria coating
• Cover kit CBT48FMCD included
• Without electronic components, no electrical connection required

Notes on establishment and operation

The installation of the apparatus shall be accompanied by a wall spacing of at least 152 mm.

Energy labelling

Storage containers for ice makers are currently not subject to EU energy label marking requirements (no EPREL registration), as the product does not contain electronic components.

Product safety (GPSR)

Manufacturer: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.